367 lines
17 KiB
Markdown
367 lines
17 KiB
Markdown
---
|
|
title: Software and hardware freedom status for each mainboard supported by Libreboot
|
|
x-toc-enable: true
|
|
...
|
|
|
|
Introduction
|
|
============
|
|
|
|
This page documents how Libreboot's [binary blob reduction
|
|
policy](news/policy.md), adopted in November 2022, is implemented in practise,
|
|
especially that line which says: *"if free software can be used, it must be
|
|
used."*
|
|
|
|
Libreboot uses [coreboot](https://coreboot.org/) for hardware initialisation.
|
|
While coreboot is nominally [*free* or *open source*
|
|
software](https://writefreesoftware.org/), on *some* (not
|
|
all) platforms, coreboot *requires* certain
|
|
[vendor files](https://en.wikipedia.org/wiki/Binary_blob)
|
|
for things like raminit. *All* boards currently supported by Libreboot can be
|
|
initialised entirely with *free*, *libre* or *open source* code from *coreboot*
|
|
itself, because Libreboot currently only focuses on such mainboards. Libreboot's
|
|
goal is to eventually support *all* mainboards from coreboot.
|
|
|
|
A more *pragmatic* [binary blob reduction policy](news/policy.md) was adopted
|
|
by Libreboot during November 2022, as part of an ongoing campaign to support
|
|
more hardware (from coreboot) within Libreboot, so as to provide *many more*
|
|
people with coreboot which, regardless of freedom status, *does* provide increased
|
|
[software freedom](https://writefreesoftware.org/) compared to fully proprietary
|
|
boot firmware which is what most
|
|
people would otherwise use; Libreboot's modern policy is thus pragmatic, further
|
|
advancing the cause of *software freedom*.
|
|
|
|
Libreboot's *previous* policy was to *ban all binary blobs*. This actively
|
|
*harmed* the Free Software movement, by reducing the number of people who can
|
|
realistically use coreboot because, to this day, nothing quite like Libreboot
|
|
yet exists. Libreboot's main purpose is to make coreboot *as easy to use as
|
|
possible* for normal, non-technical users who like the idea of coreboot but
|
|
who are otherwise not competent to configure it from scratch. Such harm
|
|
was *corrected*, in November 2022.
|
|
|
|
Coreboot architecture
|
|
---------------------
|
|
|
|
For context about certain topics, please read:
|
|
|
|
<https://doc.coreboot.org/getting_started/architecture.html>
|
|
|
|
100% libre init in coreboot
|
|
===========================
|
|
|
|
The reason this distinction matters (referring specifically to coreboot's side
|
|
of the initialisation) will become clearer, in the following sections:
|
|
|
|
A universal exemption is made in Libreboot, permitting (read: requiring, per
|
|
project policy) the inclusion of CPU microcode updates if available. You can
|
|
read more about that and the reasons *why* by reading the following article:
|
|
|
|
[CPU microcode updates
|
|
are **OK**](news/policy.md#more-detailed-insight-about-microcode)
|
|
|
|
[Releases after Libreboot 20230423 will provide separate ROMs with microcode
|
|
excluded, alongside default ones with microcode included.](news/microcode.md)
|
|
|
|
Intel platforms
|
|
===============
|
|
|
|
Descriptor vs descriptorless setup
|
|
----------------------------------
|
|
|
|
Libreboot supports several mainboards using Intel platforms. Of these, there
|
|
are essentially two class of machine (for the purposes of this article):
|
|
|
|
* Descriptorless configuration
|
|
* Descriptor-based configuration
|
|
|
|
What does *descriptor* mean? Well, traditionally, the main flash IC (containing
|
|
the boot firmware, commonly referred to as *the BIOS*) on Intel machines,
|
|
contained only *x86* executable code, responsible for initialising all of
|
|
the hardware, such as the CPU, memory controller and peripherals. This is
|
|
what we will refer to as the *descriptorless* setup; in such configurations,
|
|
the Intel ME firmware is absent by default.
|
|
|
|
In a *descriptor* configuration, the flash is divided into regions such as:
|
|
|
|
* Intel flash descriptor: always the first 4KiB of the flash. Binary-encoded
|
|
configuration data for the machine, and the regions (such as this, or
|
|
others below) is defined in here. In some ways, you might think of this as
|
|
analagous to the *Master Boot Record* on a hard drive.
|
|
* Intel GbE NVM (gigabit ethernet non-volatile memory): binary-encoded
|
|
configuration data, for the onboard Intel gigabit ethernet device, if one is
|
|
present. It contains lots of settings like MAC address, what speed the NIC
|
|
should run at, PCI IDs, *LED blinking speed* and more.
|
|
If a non-Intel NIC is used, this region of the flash will not be present.
|
|
* ME (Intel Management Engine): a *nasty* security liability in its default
|
|
state, the ME provides many features such as remote management, with full
|
|
networking, The ME is a dedicated coprocessor separate from the main CPU, and
|
|
the initialisation firmware plus operating system for it is loaded from
|
|
this dedicated region in the main boot flash. More info is available [in the
|
|
FAQ](faq.md#intelme) - where ME firmware is otherwise present, Libreboot
|
|
either [removes](docs/install/ich9utils.html) it or (with the `me_cleaner` program) [reconfigures](https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F) it in such
|
|
a way where it is disabled during machine initialisation.
|
|
* Platform region: non-program data, usually just a bunch of strings put there
|
|
by the hardware vendor.
|
|
* BIOS region: this contains the main boot firmware, responsible for
|
|
initialising the CPU, memory controller and peripherals, putting the
|
|
machine into a state where it can run programs (most likely a bootloader,
|
|
then an operating system). The coreboot code (provided by Libreboot) goes in
|
|
here.
|
|
|
|
*Basically*, you can think of such "regions" as analogous to *partitions* on
|
|
a hard drive. What's important is that the flash IC is *divided* into such
|
|
regions, where each region is intended for a specific purpose.
|
|
|
|
The contents of the *descriptor* and *GbE* regions are described by Intel
|
|
datasheets, but those datasheets often contain *reserved* sections where
|
|
parts are left undocumented. Reverse engineering efforts over the years have
|
|
documented some of these blank spots.
|
|
|
|
Libreboot does *not* distribute Intel ME images
|
|
-----------------------------------------------
|
|
|
|
Libreboot does *not* distribute the Intel ME firmware in any way, whether in
|
|
the Git repository or in releases. Where it is needed, Libreboot provides
|
|
scripts that automatically fetch and install it, in a *neutered* (disabled)
|
|
state by running the `me_cleaner` program. This is completely automated.
|
|
Please read:
|
|
|
|
<https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F>
|
|
|
|
The *BringUp* code of Intel ME is all that remains, in Libreboot configurations.
|
|
ME BringUp (BUP) is analogous to coreboot, providing initialisation for the
|
|
ME itself; by that same analogy, the way Libreboot configures it is similar to
|
|
running *coreboot* without a payload. The ME is initialised, to a state where
|
|
it can run code, but then it *doesn't actually run code*. It is thus *disabled*.
|
|
|
|
In other words, a *neutered* Intel ME setup is completely benign, both from a
|
|
software freedom and security perspective. It becomes a useless, unused
|
|
processor, that most people in the real world will never want to use anyway.
|
|
With this perspective, we see that Intel ME is now entirely inconsequential
|
|
to the average user.
|
|
|
|
*Released* Libreboot ROM images, provided pre-compiled, do *not* include the
|
|
ME firmware at all; they are scrubbed, by automated release scripts when they're
|
|
preparing a release. If you're building from source, the Libreboot build system
|
|
will automatically download it (from the vendor), neuter it and then insert it;
|
|
on release ROMs, the same scripts used by the build systems can (must) be run
|
|
manually, accomplishing the same result after the fact. Please read:
|
|
[docs/install/ivy_has_common.md](docs/install/ivy_has_common.md)
|
|
|
|
The ME firmware is *required* on almost all Intel platforms, or the machine
|
|
will turn *off* after 30 minutes (or it will not boot, if the ME also controls
|
|
whether the CPU comes out of reset).
|
|
|
|
More about Intel ME removal/disabling
|
|
----------------------------------
|
|
|
|
*Libreboot* provides a way to fully remove the ME firmware, while retaining
|
|
full use of the machine, on GM45 platforms with ICH9M southbridge. These are
|
|
laptops: ThinkPad X200/T400/T500/W500 and so on of that generation. See:
|
|
[docs/install/ich9utils.md](docs/install/ich9utils.md)
|
|
|
|
The `ich9utils` software is provided by Libreboot. The `ich9gen` utility was
|
|
specifically written by Leah Rowe, in 2014 and improved incrementally since.
|
|
|
|
On newer platforms as alluded to above, `me_cleaner` is used instead.
|
|
|
|
Notes about specific types of vendor file
|
|
===================================
|
|
|
|
VGA option ROMs
|
|
---------------
|
|
|
|
*Native* video initialisation is supported and *enabled*, for all supported
|
|
Intel platforms that have it. The source code is provided by coreboot, under
|
|
free license.
|
|
|
|
In some cases, a laptop may have a graphics chip that is unsupported by
|
|
coreboot. In this situation, a vendor file called a *VGA Option ROM* must be
|
|
used. Libreboot has *experimental* support for Nvidia GPU models of the Dell
|
|
Latitude E6400, in an experimental branch where the build system automatically
|
|
downloads the VGA ROM for it. This is currently *not* present in releases, or
|
|
in the stable branch of `lbmk`.
|
|
|
|
In other instances, a machine may have *two* graphics devices, where one has
|
|
native (free/libre) initialisation provided by coreboot. In these situations,
|
|
it is possible to insert a VGA ROM for the other one; Libreboot currently lacks
|
|
documentation for this, but it has been tested. Example: Dual Intel/Nvidia
|
|
graphics on some ivybridge or haswell thinkpads.
|
|
|
|
For *add-on* GPUs, SeaBIOS (payload) can typically scan a VGA ROM present on
|
|
the card and execute it. This has been tested on certain desktop mainboards
|
|
that Libreboot supports, and works just fine; Libreboot does not need to handle
|
|
these files at all.
|
|
|
|
Libreboot's default is *always* freedom, when feasible in practise. Users who
|
|
wish to have use of these additional GPUs, on such hardware, must take stock
|
|
of the following paragraph in Libreboot policy:
|
|
|
|
*"The principles above should apply to default configurations. However,
|
|
libreboot is to be configurable, allowing the user to do whatever they like."* -
|
|
configurable, it most certainly is! See: [docs/maintain/](docs/maintain/)
|
|
|
|
Memory controller initialisation
|
|
--------------------------------
|
|
|
|
Libreboot has *fully libre* initialisation available for all Intel memory
|
|
controllers on supported platforms. This *includes* Haswell (ThinkPad T440p
|
|
and W541) as of Libreboot 20230319 or higher.
|
|
|
|
ARM platforms (chromebooks)
|
|
=============
|
|
|
|
Mostly free software, except for the requirement on `daisy` and `peach` mainboards
|
|
to include BL1 bootloader files from the vendor. These are:
|
|
|
|
* HP Chromebook 11 G1 (daisy-spring) **(board removed from Libreboot, due to
|
|
issues (will be re-added at a later date)**
|
|
* Samsung Chromebook XE303 (daisy-snow) **(ditto)**
|
|
* Samsung Chromebook 2 13” (peach-pi) **(ditto)**
|
|
* Samsung Chromebook 2 11” (peach-pit) **(ditto)**
|
|
* nyan-* chromebooks also temporarily removed, but are 100% free software in
|
|
Libreboot
|
|
|
|
List of vendor files, specifically for each board
|
|
=================================================
|
|
|
|
This article has thoroughly explained, in a detailed overview, the precise
|
|
nature as to *what* vendor files are accomodated for in Libreboot. Again,
|
|
fully libre init from coreboot is available *on all currently supported boards*.
|
|
|
|
*From coreboot* is the critical aspect of this, but Libreboot's full scope is
|
|
the main flash IC which (in some cases) contains software outside of coreboot.
|
|
|
|
Here is a list, *for each* board, of those files:
|
|
|
|
Intel/x86
|
|
---------
|
|
|
|
### Intel ME:
|
|
|
|
Neutered ME required on these targets: `t420_8mb`, `t420s_8mb`, `t430_12mb`,
|
|
`t440p_12mb`, `t440pmrc_12mb`, `t520_8mb`, `t530_12mb`, `w530_12mb`,
|
|
`w541_12mb`, `w541mrc_12mb`, `x220_8mb`, `x230_12mb`, `x230_16mb`,
|
|
`x230edp_12mb`, `x230t_12mb`, `x230t_16mb`, `hp8200sff`, `hp2560p_8mb`,
|
|
`hp2570p_16mb`, `hp8300usdt_16mb`, `hp2170p_16mb`, `hp9470m_16mb`
|
|
and `t1650_12mb`.
|
|
|
|
As stated, Libreboot provides this in a state where the ME is no longer a
|
|
threat to security. It initialises itself, but then does nothing, so it's
|
|
disabled. This is done using `me_cleaner`. See:
|
|
<https://github.com/corna/me_cleaner/wiki/How-does-it-work%3F>
|
|
|
|
### KBC1126 EC firmware (HP laptops):
|
|
|
|
This applies to the following targets: `hp2170p_16mb`, `hp2560p_8mb`,
|
|
`hp2570p_16mb`, `hp8470pintel_16mb`, `hp9470m_16mb`.
|
|
|
|
[EC firmware](faq.md#ec-embedded-controller-firmware)
|
|
is inserted into main boot flash, rather than being on a separate
|
|
IC. This is *better* because libre replacements would be more easy to install in
|
|
the future, and reverse engineering is made much easier by it. Libreboot's
|
|
build system handles such firmware in a script, automatically downloading
|
|
it during the build process. Libreboot 20230423 onwards does scrub EC firmware
|
|
and provide functionality in a special script, to insert them with `cbfstool`
|
|
at the correct offset as defined by coreboot config for each board.
|
|
|
|
### SMSC SCH5545 Environmental Control
|
|
|
|
This is a tiny firmware required for fan control, on Dell Precision T1650.
|
|
|
|
### CPU microcode:
|
|
|
|
[*Microcode* updates](faq.md#microcode)
|
|
for CPU provided on *all* x86 platforms, by default. Not
|
|
technically required, but highly recommended. To remove, do:
|
|
|
|
cbfstool filename.rom remove -n cpu_microcode_blob.bin
|
|
|
|
On ASUS KFSN4-DRE, KCMA-D8 and KGPE-D16 boards, do this instead:
|
|
|
|
cbfstool filename.rom remove -n microcode_amd.bin
|
|
cbfstool filename.rom remove -n microcode_amd_fam15h.bin
|
|
|
|
[Releases after Libreboot 20230423 will provide separate ROMs with microcode
|
|
excluded, alongside default ones with microcode included.](news/microcode.md)
|
|
|
|
Removal of microcode updates will affect system stability in a negative way,
|
|
introducing non-standard broken behaviour and it may result in the machine
|
|
being unable to boot properly. In other cases, doing so may break features such
|
|
as S3 suspend/resume.
|
|
|
|
CPU microcode files included by default, on all x86 boards. While not needed
|
|
in most cases, their use is highly recommended. For reasons why, see:
|
|
[news/policy.md#more-detailed-insight-about-microcode](news/policy.md#more-detailed-insight-about-microcode)
|
|
|
|
### Intel Flash Descriptor (IFD):
|
|
|
|
Intel Flash Descriptors are provided as blobs on some boards, but these are
|
|
not *software* blobs. They are configurations provided in a binary format,
|
|
fully readable by libre software. For example:
|
|
|
|
* Libreboot's `ich9gen` program generates ICH9M flash descriptors from scratch.
|
|
* Coreboot's `ifdtool` program has extensive features for manipulating Intel
|
|
flash descriptors.
|
|
* Corebot's `bincfg` program generates any sort of binary from a `.spec` file
|
|
which can describe any binary format in a human readable format. It contains
|
|
several flash descriptors for several platforms, but Libreboot does not use
|
|
these.
|
|
|
|
Intel GbE NVM config (configuration data, binary-encoded, for gigabit NIC):
|
|
|
|
* Libreboot's `ich9gen` program *also* generates GbE NVM images specifically
|
|
for Intel NICs used in GM45 thinkpads.
|
|
* Libreboot's `nvmutil` program can manipulate GbE NVM images
|
|
|
|
ARM/chromebooks
|
|
---------------
|
|
|
|
### BL1 bootloader (peach/daisy):
|
|
|
|
BL1 bootloader needed on: `daisy_snow`, `daisy_spring` and `peach_pit`.
|
|
|
|
These boards are *currently* not present. They were removed from Libreboot,
|
|
because the build system does not yet auto-insert the BL1 files. The boards
|
|
are otherwise believed to work, using Alper's port of U-Boot in Libreboot.
|
|
|
|
Conclusion
|
|
==========
|
|
|
|
From the above, you can see that Libreboot really *does* implement a *binary
|
|
blobs reduction policy*, with the emphasis on *reduction* being most critical.
|
|
It can be asserted that Libreboot does in fact provide a reasonable level of
|
|
*software freedom*, on all boards.
|
|
|
|
Libreboot *could* add a lot more such files for many platforms, to enable various
|
|
extra features, that it instead avoids adding, precisely because the *purpose*
|
|
of the Libreboot project is to promote *libre* software and *minimise* the
|
|
power that proprietary software developers have over users.
|
|
|
|
I hope this article provided food for thought.
|
|
|
|
An aside: hardware freedom
|
|
--------------------------
|
|
|
|
None of the currently supported Libreboot machines have libre *hardware*, in
|
|
the sense that ICs do not come with publicly available *verilog* files and the
|
|
like. You could not manufacture your own replacements of these machines.
|
|
|
|
Some schematics and boardview files describing the circuit boards of each
|
|
machine are available online, through various channels. You have to search for
|
|
them yourself; one day, the Right To Repair movement will hopefully bring
|
|
about universal access to such documents by the public.
|
|
|
|
Further reading
|
|
===============
|
|
|
|
This article has described code what goes in the *main boot flash*, but any
|
|
computer you buy will have *tons* of firmware elsewhere in the system. Some
|
|
insights are available in the Libreboot FAQ. See:
|
|
|
|
* [faq.md#what-level-of-software-freedom-does-libreboot-give-me](faq.md#what-level-of-software-freedom-does-libreboot-give-me)
|
|
* [faq.md#what-other-firmware-exists-outside-of-libreboot](faq.md#what-other-firmware-exists-outside-of-libreboot)
|
|
|
|
Of these, the most critical are HDD/SSD firmware and EC firmware. The problems
|
|
described in those two links apply to many different computers, including
|
|
Libreboot ones, and virtually every other computer in the world.
|