136 lines
5.1 KiB
Markdown
136 lines
5.1 KiB
Markdown
---
|
|
title: HP EliteBook 8560w
|
|
x-toc-enable: true
|
|
...
|
|
|
|
**[PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING](../../news/safety.md),
|
|
OR YOU MIGHT BRICK YOUR MACHINE: [SAFETY PRECAUTIONS](../../news/safety.md)**
|
|
|
|
<div class="specs">
|
|
<center>
|
|
<img tabindex=1 alt="HP EliteBook 8560w" class="p" src="https://av.libreboot.org/hp8560w/hp8560w.webp" /><span class="f"><img src="https://av.libreboot.org/hp8560w/hp8560w.webp" /></span>
|
|
</center>
|
|
|
|
| ***Specifications*** | |
|
|
|----------------------------|------------------------------------------------|
|
|
| **Manufacturer** | HP |
|
|
| **Name** | EliteBook 8560w |
|
|
| **Variants** | EliteBook 8560w |
|
|
| **Released** | 2011 |
|
|
| **Chipset** | Intel QM67 |
|
|
| **CPU** | Intel Sandy Bridge (socketed) |
|
|
| **Graphics** | MXM-A (3.0), socketed |
|
|
| **Display** | 15.6" 1600x900 or 1920x1080 LCD |
|
|
| **Memory** | Two or four slots, max 8GB/slot
|
|
(16GB or 32GB), DDR3/SODIMM |
|
|
| **Architecture** | x86_64 |
|
|
| **EC** | SMSC KBC1126, proprietary (in main boot flash) |
|
|
| **Original boot firmware** | HP UEFI firmware |
|
|
| **Intel ME/AMD PSP** | Present. Can be disabled with me_cleaner. |
|
|
| **Flash chip** | SOIC-8 8MiB (64Mbit) |
|
|
|
|
|
|
```
|
|
W+: Works without blobs;
|
|
N: Doesn't work;
|
|
W*: Works with blobs;
|
|
U: Untested;
|
|
P+: Partially works;
|
|
P*: Partially works with blobs
|
|
```
|
|
|
|
| ***Features*** | |
|
|
|---------------------------------------------------|----|
|
|
| **Internal flashing with original boot firmware** | N |
|
|
| **Display** | W* |
|
|
| **Audio** | W+ |
|
|
| **RAM Init** | W+ |
|
|
| **External output** | W+ |
|
|
| **Display brightness** | W+ |
|
|
|
|
| ***Payloads supported*** | |
|
|
|---------------------------|-----------|
|
|
| **GRUB** | Works |
|
|
| **SeaBIOS** | Works |
|
|
| **SeaBIOS with GRUB** | Works |
|
|
</div>
|
|
Introduction
|
|
============
|
|
|
|
**Unavailable in Libreboot 20240126 or earlier. You must [compile from
|
|
source](../build/), or use a release newer than 20240126.**
|
|
|
|
This is a beastly 15" Sandy Bridge mobile workstation from HP.
|
|
|
|
**Wi-Fi does not work. It shows correctly in lspci, but stays hard blocked.**
|
|
|
|
GPU
|
|
---
|
|
|
|
This laptop has upgradeable GPU: it has a socketed MXM-A 3.0 card. So far,
|
|
only Quadro 1000M and 2000M (which shipped with the laptop originally) have
|
|
been tested with Libreboot.
|
|
|
|
These laptops shipped with eDP and LVDS panels. If you choose to upgrade the
|
|
graphics card, make sure it is compatible with the panel you have. Use the
|
|
following command to check:
|
|
|
|
xrandr
|
|
|
|
Or if using Wayland:
|
|
|
|
wlr-randr
|
|
|
|
If you have "LVDS-1 connected", your GPU upgrade needs to support LVDS.
|
|
According to [this forum thread](https://forums.macrumors.com/threads/2011-imac-graphics-card-upgrade.1596614/),
|
|
AMD's 1st gen GCN cards are the newest and most powerful to support LVDS.
|
|
If you have an eDP panel, you should be able to use newer cards than that.
|
|
|
|
As long as the card has an onboard VBIOS, Libreboot will execute it and
|
|
everything *should* work. **However, this is currently untested.**
|
|
|
|
Build ROM image from source
|
|
---------------------------
|
|
|
|
The build target, when building from source, is thus:
|
|
|
|
./build roms hp8560w_8mb
|
|
|
|
Installation
|
|
============
|
|
|
|
Insert binary files
|
|
-------------------
|
|
|
|
If you're using a release ROM, please ensure that you've inserted extra firmware
|
|
required refer to the [guide](../install/ivy_has_common.md) for that. (failure
|
|
to adhere to this advice will result in a bricked machine)
|
|
|
|
Set MAC address
|
|
---------------
|
|
|
|
This platform uses an Intel Flash Descriptor, and defines an Intel GbE NVM
|
|
region. As such, release/build ROMs will contain the same MAC address. To
|
|
change the MAC address, please read [nvmutil documentation](../install/nvmutil.md).
|
|
|
|
Flash a ROM image (software)
|
|
-----------------
|
|
|
|
If you're already running Libreboot, and you don't have flash protection
|
|
turned on, [internal flashing](../install/) is possible.
|
|
|
|
Flash a ROM image (hardware)
|
|
-----------------
|
|
|
|
**REMOVE all power sources like battery, charger and so on, before doing this.
|
|
This is to prevent short circuiting and power surges while flashing.**
|
|
|
|
Remove the bottom cover. The SOIC-8 flash chip is next to the memory slot 2.
|
|
You need to cut away a small piece of the clear plastic protection material
|
|
to get to the chip.
|
|
|
|
|
|
|
|
For information about programming the chip, please refer to [25xx NOR flash
|
|
instructions](../install/spi.md).
|