68 lines
3.1 KiB
Markdown
68 lines
3.1 KiB
Markdown
---
|
|
title: Ivybridge internal flashing
|
|
x-toc-enable: true
|
|
...
|
|
|
|
**[PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING](../../news/safety.md),
|
|
OR YOU MIGHT BRICK YOUR MACHINE: [SAFETY PRECAUTIONS](../../news/safety.md)**
|
|
|
|
External flashing still recommended
|
|
-----------------------------------
|
|
|
|
Internal flashing is quite complex, from a software and hardware
|
|
perspective, when switching from Lenovo firmware to Libreboot.
|
|
If you already have Libreboot, then you likely have the entire
|
|
flash unlocked so you can refer to generic flashing instructions.
|
|
|
|
Internal flashing from Lenovo firmware is more time consuming, but basically
|
|
costs less money, because there's less equipment that you need for it.
|
|
|
|
This method is also more risky, because one of the steps involves shorting
|
|
two pins on the HDA (audio) chip, and if you do it wrong you could short
|
|
the wrong thing by mistake; consequences could be blown fuses and/or fire,
|
|
or just a dead ThinkPad. Proceed at your own risk!
|
|
|
|
If you prefer external flashing, see: [external flashing](x230_external.md)
|
|
|
|
Internal flashing from vendor firmware (ThinkPads only)
|
|
----------------------------------------
|
|
|
|
IVYBRIDGE ONLY:
|
|
|
|
Refer to this coreboot guide:
|
|
<https://doc.coreboot.org/mainboard/lenovo/ivb_internal_flashing.html?highlight=x230>
|
|
|
|
With this guide, you can exploit a vulnerability in Lenovo firmware, to flash
|
|
just the BIOS region without disassembling your machine.
|
|
|
|
You will have to flash just the BIOS region, on upstream coreboot. Just compile
|
|
upstream coreboot from scratch. Coreboot instructions here:
|
|
<https://doc.coreboot.org/tutorial/index.html>
|
|
|
|
You can then strap HDA\_SDO (soft descriptor override), which will disable
|
|
flash protections set in the Intel Flash Descriptor. More info about that is
|
|
available here:
|
|
<https://winraid.level1techs.com/t/guide-unlock-intel-flash-descriptor-read-write-access-permissions-for-spi-servicing/32449>
|
|
|
|
On ivybridge platforms specifically, coreboot supports what's called
|
|
the *ME Soft Temporary Disable*, which disables the ME after BringUp, similar
|
|
to `me_cleaner`. You can do this by setting `me_state=Disabled` in nvramtool.
|
|
|
|
Now boot with HDA\_SDO strapped. On the HDA (audio) chip, there is a pin that
|
|
you can short, to disable IFD-based flash protections. You simply HOLD it in
|
|
the shorted state, while booting up the machine, and if successful, you will
|
|
then have the flash unlocked. This, combined with ME Soft Temporary Disable,
|
|
and the internal flashing guide linked above (from coreboot.org), you'll get
|
|
to a state where you can simply flash all regions. You can then flash the
|
|
truncated+neutered images from Libreboot, after building the ROMs in lbmk; see
|
|
[Libreboot build instructions](../build/).
|
|
|
|
The following photo shows what to short on the ThinkPad X230. You'll have to
|
|
look for it. X230 is easy because you don't have to directly touch the pins,
|
|
instead you can use alt points that have continuity. They are marked on this
|
|
photo:
|
|
|
|
<img tabindex=1 src="https://av.libreboot.org/x230/hda_sdo.jpg" /><span class="f"><img src="https://av.libreboot.org/x230/hda_sdo.jpg" /></span>
|
|
|
|
TODO: Document other ivybridge thinkpads (just show pics)
|