272 lines
12 KiB
Markdown
272 lines
12 KiB
Markdown
---
|
|
title: Dell Latitude E6400
|
|
x-toc-enable: true
|
|
...
|
|
|
|
<div class="specs">
|
|
<center>
|
|
<img tabindex=1 alt="Dell Latitude E6400" class="p" src="https://av.libreboot.org/e6400/e6400-seabios.jpg" /><span class="f"><img src="https://av.libreboot.org/e6400/e6400-seabios.jpg" /></span> <img tabindex=1 alt="Dell Latitude E6400 XFR" class="p" style="max-width:24em" src="https://av.libreboot.org/e6400/e6400xfr-seabios.jpg" /><span class="f"><img src="https://av.libreboot.org/e6400/e6400xfr-seabios.jpg" /></span>
|
|
</center>
|
|
|
|
| ***Specifications*** | |
|
|
|----------------------------|------------------------------------------------|
|
|
| **Manufacturer** | Dell |
|
|
| **Name** | Latitude E6400 |
|
|
| **Variants** | E6400, E6400 XFR and E6400 ATG are supported |
|
|
| **Released** | 2009 |
|
|
| **Chipset** | Intel Cantiga GM45(Intel GPU)/PM45(Nvidia GPU) |
|
|
| **CPU** | Intel Core 2 Duo (Penryn family). |
|
|
| **Graphics** | Intel GMA 4500MHD (and NVidia Quadro NVS 160M
|
|
on some models) |
|
|
| **Display** | 1280x800/1440x900 TFT |
|
|
| **Memory** | 2 or 4GB (Upgradable to 8GB) |
|
|
| **Architecture** | x86_64 |
|
|
| **EC** | SMSC MEC5035 with proprietary firmware |
|
|
| **Original boot firmware** | Dell BIOS |
|
|
| **Intel ME/AMD PSP** | Present. Can be completely disabled. |
|
|
| **Flash chip** | SOIC-8 4MiB or 2MiB+4MiB |
|
|
|
|
|
|
```
|
|
W+: Works without blobs;
|
|
N: Doesn't work;
|
|
W*: Works with blobs;
|
|
U: Untested;
|
|
P+: Partially works;
|
|
P*: Partially works with blobs
|
|
```
|
|
|
|
| ***Features*** | |
|
|
|---------------------------------------------------|----|
|
|
| **Internal flashing with original boot firmware** | W+ |
|
|
| **Display (if Intel GPU)** | W+ |
|
|
| **Display (if Nvidia GPU)** | W* |
|
|
| **Audio** | W+ |
|
|
| **RAM Init** | W+ |
|
|
| **External output** | W+ |
|
|
| **Display brightness** | P+ |
|
|
|
|
| ***Payloads supported*** | |
|
|
|---------------------------|-----------|
|
|
| **GRUB** | FAIL |
|
|
| **SeaBIOS** | Works |
|
|
| **SeaBIOS with GRUB** | FAIL |
|
|
</div>
|
|
Introduction
|
|
============
|
|
|
|
Known supported variants: E6400, E6400 XFR and E6400 ATG. This page has
|
|
been updated to include information about Nvidia GPU variants. See news post:
|
|
[Dell Latitude E6400 XFR support confirmed, plus experimental Nvidia GPU
|
|
support on E6400 variants](../../news/e6400nvidia.md).
|
|
|
|
**To install Libreboot, see: [E6400 installation
|
|
instructions](../install/e6400.md)**
|
|
|
|
ROM images for Dell Latitude E6400 are available for flashing in the Libreboot
|
|
release 20230423 onwards, or you can compile a ROM image for installation via
|
|
lbmk, see: [build instructions](../build/)
|
|
|
|
There are two possible flash chip sizes for the E6400: 4MiB (32Mbit) or 2+4MiB
|
|
(16Mbit+32MBit). Libreboot presently supports the 4MiB version, and provides
|
|
8MiB images for those who upgrade their flash to 8MiB or 16MiB. There appears
|
|
to be several possible mainboard PCBs for the E6400, which we believe mostly
|
|
affects the GPU configuration and the number of available SPI flash footprints:
|
|
|
|
- LA-3801P: iGPU, possibly dual SPI (however only one may be populated)
|
|
- LA-3803P: dGPU, dual SPI (however only one may be populated)
|
|
- LA-3805P: iGPU, single SPI flash (4MiB)
|
|
- LA-3806P: dGPU, unknown SPI configuration (likely at least 4MiB)
|
|
|
|
These PCB numbers can be found either under the black plastic in the RAM slots
|
|
on the bottom (CPU side) of the board, the top left corner near the VGA port
|
|
(top side, under the keyboard and palmrest), or near the CPU backplate (only
|
|
requires removal of the keyboard).
|
|
|
|
We believe that all boards will have at least a single 4MiB flash chip,
|
|
regardless of the number of SPI footprints. This is likely the most common
|
|
configuration on most available systems. The 2+4MiB configuration likely
|
|
would have only been used on systems with full Intel ME firmware with AMT
|
|
functionality, though this configuration has not yet been encountered.
|
|
|
|
Most people will want to use the 4MiB images.
|
|
|
|
Intel GPU: 100% Free Software is possible
|
|
---------------
|
|
|
|
This is a GM45/PM45 platform, so completely libre initialisation in
|
|
coreboot is possible, provided by default in Libreboot.
|
|
|
|
Management Engine (ME) firmware removed
|
|
-------------------------
|
|
|
|
This port in Libreboot makes use of `ich9gen` from ich9utils, which
|
|
you can read about in the [ich9utils manual](../install/ich9utils.md) - this
|
|
creates a no-ME setup. The Intel Management Engine firmware (ME) is completely
|
|
removed, and the ME disabled, just like on ThinkPad X200, T400 and so on.
|
|
|
|
*The E6400 laptops may come with the ME (and sometimes AMT in addition) before
|
|
flashing libreboot. Dell also sold configurations with the ME completely
|
|
disabled, identifiable by a yellow sticker reading "3 ME Disabled" inside the
|
|
bottom panel. This config sets the MeDisable bit in the IFD and sets the ME
|
|
region almost entirely to 1's, with the occasional 32-bit value (likely not
|
|
executable). libreboot disables and removes it by using a modified descriptor:
|
|
see [../install/ich9utils.md](../install/ich9utils.md)*
|
|
(contains notes, plus instructions)
|
|
|
|
Issues pertaining to Nvidia GPU variants
|
|
========================================
|
|
|
|
Copper shim for GPU cooling
|
|
---------------------------
|
|
|
|
NOTE: this section does *not* apply to XFR or ATG variants of E6400, which have
|
|
a much beefier heatsink by default.
|
|
|
|
The *default* heatsink in Nvidia variants of E6400 (regular model) has thermal
|
|
paste for the CPU, and a thermal *pad* for the GPU. This pad is woefully
|
|
inadequate, but replacing it with *paste* is a bad idea, because of the gap
|
|
there would be between heatsink plate and GPU die.
|
|
|
|
A solution for this would be to use a *copper shim*, with paste on each side,
|
|
to replace the thermal pad.
|
|
|
|
This eBay seller seems to make and sell a lot of copper shims, specifically
|
|
for E6400:
|
|
|
|
**SELLER LINK REMOVED.** - one will not be re-added. Putting ebay links on the
|
|
Libreboot site is folly, because they disappear. Just search for it and see if
|
|
you can find one for purchase. It's literally just a small bit of copper cut
|
|
smooth to just the right size. Actually, there's a lot of engineering behind
|
|
that, but installation is very simple, and any decent seller will provide
|
|
guidance.
|
|
|
|
If you buy one of those, could you measure it? Tell Libreboot the dimensions.
|
|
Get in touch with us. It would be nice to know precise specs, but that seller
|
|
provides what you need. If you find similar listings elsewhere, please also
|
|
let us know.
|
|
|
|
The shim will greatly reduce GPU temperatures, and probably improve performance
|
|
due to less GPU throttling as a result of heat.
|
|
|
|
Nouveau(in Linux) currently broken
|
|
----------------------------------
|
|
|
|
Nouveau is the libre driver in Linux, for Nvidia graphics. Nvidia themselves
|
|
do not provide binary drivers anymore, for these GPUs. It crashes in Linux,
|
|
when you try to start Xorg (Wayland is untested).
|
|
|
|
If you're booting an Nvidia variant in Linux, boot Linux with
|
|
the `nomodeset` kernel option at boot time. This means that graphics are
|
|
rendered in software.
|
|
|
|
Development discussion, for Nvidia variants of E6400, is available here:
|
|
|
|
<https://codeberg.org/libreboot/lbmk/issues/14>
|
|
|
|
OpenBSD's Nvidia driver works perfectly
|
|
---------------------------------------
|
|
|
|
OpenBSD 7.3 was tested, on my Nvidia-model E6400, and Xorg works OK with
|
|
the `nv` driver.
|
|
|
|
<img tabindex=1 class="l" style="max-width:35%" src="https://av.libreboot.org/openbsd.jpg" /><span class="f"><img src="https://av.libreboot.org/openbsd.jpg" /></span>
|
|
|
|
See: <https://www.openbsd.org/>
|
|
|
|
OpenBSD is a complete free 4.4BSD Unix operating system focused on portability,
|
|
security and *code correctness*. It's quite useable for most day to day tasks.
|
|
|
|
You can find information in Libreboot about BSD operating systems on the
|
|
main guide:
|
|
|
|
* [BSD Operating Systems](../bsd/)
|
|
|
|
FreeBSD and newer Linux (e.g. Archlinux) untested!
|
|
--------------------------------------------------
|
|
|
|
FreeBSD has not yet been tested, as far as we know, but it should work.
|
|
|
|
[Testers needed! Please get in touch!](../maintain/testing.html)
|
|
|
|
**At the time of writing this post, FreeBSD
|
|
and newer Linux have not yet been tested** (I plan to test *Arch Linux*), but
|
|
the older Linux/Mesa version in Debian 11.6 works just fine in the Dell BIOS,
|
|
and I've confirmed that it uses the exact same Video BIOS Option ROM.
|
|
|
|
Desktop environment / window manager on OpenBSD + Performance notes
|
|
-------------------------------------------------------------------
|
|
|
|
TODO: This section could probably be moved to its own section. It's not really
|
|
relevant to Libreboot per se, but it may help a few people.
|
|
|
|
Again, Linux's nouveau driver is currently broken. I've been playing with my
|
|
E6400 (nvidia model) for a while and I've found that these things are a *must*
|
|
for performance (the machine otherwise lags, openbsd's `nv` driver isn't quite
|
|
as good as nouveau, when the nouveau one works that is):
|
|
|
|
* Use a lightweight desktop environment like LXQt, or lightweight window
|
|
manager (OpenBSD has `cwm` in base, and it's excellent)
|
|
* Install `obsdfreqd` which scales down the CPU speed during idle state; the
|
|
GPU has a poor thermal pad for cooling and so if the CPU is running hot,
|
|
that doesn't bode well for GPU temperatures either, and the GPU is likely
|
|
lagging due to heat:
|
|
|
|
How to install `obsdfreqd`:
|
|
|
|
pkg_add obsdfreqd
|
|
rcctl enable obsdfreqd
|
|
|
|
Now, before you start it, make sure `apmd` is disabled; it can be used, but
|
|
not with the `-A` flag:
|
|
|
|
rcctl stop apmd
|
|
rcctl disable apmd
|
|
|
|
Now start obsdfreqd:
|
|
|
|
rcctl start obsdfreqd
|
|
|
|
You will be well served to perform the copper shim mod, for GPU cooling.
|
|
With `obsdfreqd`, your laptop will run much cooler. This is generally a good
|
|
idea anyway, especially on laptops, to save electricity.
|
|
|
|
Of course, there are many tweaks that you can do to OpenBSD but the key is:
|
|
don't use heavy bloated software. The term *lightweight* is misleading anyway;
|
|
if the software does its job efficiently, and you're happy with it, then it is
|
|
by definition superior for your purposes. So, "lightweight" is simply a word
|
|
for "efficient" in many contexts. We should encourage the use and development
|
|
of highly efficient software that runs more smoothly on old machines. The
|
|
elitist attitude of *just buy a new computer* is quite damaging; re-use is
|
|
always better, when that is feasible and safe. The power of BSD (and Linux) is
|
|
precisely that you can tweak it to get the most use out of older hardware..
|
|
|
|
Another nice hint: higher resolution video like 1080p 60fps or above won't
|
|
play smoothly at all in a web browser. In testing at least on OpenBSD 7.3,
|
|
Firefox seems to have the best performance among all the web browsers, at least
|
|
when I used it. Anything 720p 30/60fps will work ~OK.
|
|
|
|
For YouTube, you could use yt-dlp, which is available in ports, and use mpv to
|
|
stream via yt-dlp. Or download manually with yt-dlp and play offline. See:
|
|
|
|
<https://github.com/yt-dlp/yt-dlp>
|
|
|
|
<https://mpv.io/>
|
|
|
|
Another hint: for watching youtube in the browser, Invidious works quite well.
|
|
It's a frontend that lets you view it by proxy, and there are many instances
|
|
of it online. For a list of instances, see:
|
|
|
|
<https://redirect.invidious.io/>
|
|
|
|
Unlike youtube.com, watching youtube via invidious works even with JavaScript
|
|
turned off in the browser. You can use it to also search YouTube, and then
|
|
paste the youtube.com link into yt-dlp or mpv; Invidious websites themselves
|
|
also often provide a download button for videos.
|
|
|
|
The yt-dlp software may also work on a few other websites besides YouTube.
|
|
Running with JavaScript turned *off* is generally recommended for performance,
|
|
especially on slower machines, turning it on only when you need it. Many
|
|
websites are just full of junk nowadays.
|
|
|