447 lines
26 KiB
Markdown
447 lines
26 KiB
Markdown
% Libreboot Build System Audit 4
|
|
% Leah Rowe
|
|
% 31 December 2023
|
|
|
|
NOTE: Libreboot standardises on [flashprog](https://flashprog.org/wiki/Flashprog)
|
|
now, as of 27 January 2024, which is a fork of flashrom.
|
|
|
|
Introduction
|
|
============
|
|
|
|
This article pertains to the current Libreboot (lbmk) revision at this time
|
|
of writing, which is `11a821637d8a36f4a72001ef8d8c41952f066cc3` from 31
|
|
December 2023. A *release* is also being considered for some time in January
|
|
of 2024, based on this audit and new features that are planned, plus new
|
|
boards. To compliment this audit, the [TODO page](../tasks/), which now lists
|
|
what tasks the project is interested in or working on at any given time.
|
|
|
|
A lot of work has gone into Libreboot since [Libreboot Build System
|
|
Audit 3](audit3.md), which coincided with
|
|
the [Libreboot 20231021](libreboot20231021.md) release, right up
|
|
to [Libreboot 20231106](libreboot20231106).
|
|
|
|
Modest code size reduction
|
|
--------------------------
|
|
|
|
The main purpose of audit 4 has been to *finish* audit 3. More logic has been
|
|
generalised, and *another* sloccount reduction has been observed: 1618 SLOC in
|
|
the shell scripts, versus 1744 as of audit 3, with *increased* (not decreased)
|
|
functionality. This accounts for a *7.22%* decrease in the complexity of
|
|
[lbmk](../docs/maintain/), which is the Libreboot build system.
|
|
|
|
Summarised changes since 20231106
|
|
-------------------------------
|
|
|
|
These and subsequent changes will be present in the *next Libreboot release*,
|
|
after Libreboot 20231106, but they can already be obtained now, if you compile
|
|
Libreboot [from source via lbmk.git](../docs/build/).
|
|
|
|
Although audit 3 was the previous audit, several changes were made after
|
|
that, up to the Libreboot 20231106 release. Therefore, this audit changelog is
|
|
relative to Libreboot 20231106, *not* audit 3. Most of this is minor code
|
|
cleanup patches that, together, account for the moderate code size reduction,
|
|
but there are some new features and bug fixes too.
|
|
|
|
Not all of these are actually audit-related, but are still nice changes, and
|
|
will be included in the release changelog, for the next release
|
|
after Libreboot 20231106. The changes are, from newest to oldest:
|
|
|
|
In addition to specific changes listed below, there are several commits part of
|
|
the audit titled "general code cleanup", which go through the entire build system,
|
|
sweeping it for bad or unclean code, cleaning up the coding style, removing
|
|
obsolete code or generally improving the coding style/quality, to make the
|
|
code more readable. Such has been the main focus of this audit.
|
|
|
|
And now, specific changes:
|
|
|
|
* GRUB: bumped the revision again, to the 2.12 release which came out
|
|
on 20 December 2023. We previously bumped this to a November revision,
|
|
mentioned earlier in this changelog, but now we can use the officia/
|
|
GRUB 2.12 release.
|
|
* `target.cfg` files are now possible for single-tree projects, not just
|
|
multi-tree projects. For single-tree projects, it goes
|
|
at `config/projectname/target.cfg`, and it goes on the
|
|
existing `config/projectname/tree/target.cfg` location for multi-tree projects.
|
|
* `script/update/trees`: Support adding custom arguments to the make command,
|
|
when running a makefile within a project. This is defined by `makeargs` in
|
|
the `target.cfg` file for a given project.
|
|
* Generic cmake handling now supported, in `script/update/trees` - it is no
|
|
longer hardcoded, for the `uefitool` package (from which we
|
|
run `uefiextract`). Simply: define `cmakedir` in a project `target.cfg` file.
|
|
It could even be `cmakedir="."` if you wish, so that all of it is built,
|
|
though we specify `cmakedir="UEFIExtract"` for uefitool.
|
|
* Unify `script/update/trees` and `script/build/grub` - now, generic autoconf
|
|
handling is present in `script/update/trees`, so it can be used for any
|
|
project, including GRUB, and arguments for configure/autogen/bootstrap scripts
|
|
are configurable in project `target.cfg` files. The actual running
|
|
of `grub-mkstandalone` is now handled from `script/build/roms`. This reduces
|
|
the number of shell scripts from 12 to 11, in lbmk.
|
|
* disable u-boot on x86 qemu for now (prevents a build error in lbmk)
|
|
* `script/build/serprog`: Return error status (exit) if basename fails, when
|
|
processing various board targets available on stm32/rp2040 projects. Patch
|
|
courtesy of Leah Rowe.
|
|
* **NEW BOARD:** HP 8300 CMT mainboard, added by Riku Viitanen, who worked
|
|
on it with a tester in the IRC channel.
|
|
* Fixed implicit typecasting bug on flashprog 1.2 source code, thus preventing
|
|
a build issue (tested on Debian 12.2). Patch courtesy of Leah Rowe.
|
|
* `script/build/roms`: Rename `check_target` to `configure_target`
|
|
and `prepare_target` to `configure_dependencies`, for increased code clarity.
|
|
* `git/pico-serprog`: Use Riku's newer revision, which sets the drive level
|
|
to 12mA by default, up to the previous default of 4mA. The new level is
|
|
within safety specifications on all flash ICs, but will result in greater
|
|
reliability, especially on ISP-based flashing setups. Also merged a fix by
|
|
Riku Viitanen, fixing a build error on boards where `PICO_DEFAULT_LED_PIN` is
|
|
not defined by the pico sdk; in these cases, the status LED is simply unused.
|
|
* `script/build/roms`: Improved error handling for ROM image build functions,
|
|
which run inside subshells. They now more reliably cause an exit from lbmk,
|
|
under error conditions, and those exits are guaranteed now to be non-zero.
|
|
Patch courtesy of Leah Rowe.
|
|
* `script/build/roms`: Remove redundant check on cros roms, where it
|
|
checked whether initmode was normal; on these setups, it's always libgfxinit.
|
|
* **BOARD:** the `e6400_4mb` target is unaltered, but now a
|
|
new `e6400nivida_4mb` target is defined. This target disabled libgfxinit,
|
|
and only executes the nvidia VGA ROM, so it's only applicable to the nvidia
|
|
variant of Dell Latitude E6400. The `e6400_4mb` variant enables both, but
|
|
causes some issues on nvidia models when `nomodeset` is used - only KMS works,
|
|
but nouveau is unstable in certain conditions and on some linux/mesa versions,
|
|
with this board when Libreboot is used. So it's recommended on nvidia variants
|
|
to use the `e6400nvidia_4mb` option, and use `e6400_4mb` only on intel variants.
|
|
Patch courtesy Leah Rowe, responding to a bug report on the IRC channel.
|
|
* set projectname/version strings properly, in scripts that call it. It was
|
|
previously done unconditionally in err.sh, without being called, but this
|
|
was later changed, and scripts that use it weren't adapted, so it turned
|
|
out that the strings were empty when used. Now the strings are properly set,
|
|
in all scripts that need them. These strings are provided by the build system,
|
|
which checks itself at startup. Patch courtesy of Leah Rowe.
|
|
* `script/update/trees`: Fix infinite loop caused in some conditions, when
|
|
vendor files are being used. The trees script calls the vendor download
|
|
script, which in turn calls the trees script; an additional check has been
|
|
introduced, to prevent a runaway condition where the two scripts endlessly
|
|
call each other, thus preventing an infinite loop. Patch courtesy Leah Rowe.
|
|
* `script/vendor/download`: check whether a config file exists, before trying
|
|
to read it. This reduces the chance of crashing the build system, when running
|
|
the script on certain targets. Patch courtesy of Leah Rowe.
|
|
* `script/vendor/inject`: Fixed a bad error check, when running `cd` to switch
|
|
to the ROM images directory, when creating archives. Patch courtesy Leah Rowe.
|
|
* Don't delete microcode updates on GM45 ROMs in releases. Microcode updates
|
|
are always included in builds, but the release build scripts were copying
|
|
certain ROM images to cerate versions (alongside the default ones) with
|
|
microcode disabled. This is no longer required, due to the existence of
|
|
the [Canoeboot project](https://canoeboot.org/). You can also still delete them
|
|
very easily, using cbfstool, if they are included in a given set of images,
|
|
so this change reduces the uncompressed size of the ROM images in releases.
|
|
This also means that the file names of all ROM images now match the file names
|
|
in canoeboot images, when dealing with a mainboard supported by both projects.
|
|
Patch courtesy of Leah Rowe.
|
|
* `script/update/release`: Don't test `script/vendor/inject` at the end. This
|
|
is regularly tested anyway, during development, so it's a waste of time to
|
|
have it done by the release build script. This reduces the amount of time
|
|
taken to build a release archive. Patch courtesy of Leah Rowe.
|
|
* `script/update/release`: Don't insert crossgcc tarballs into release
|
|
archives. These are re-inserted needlessly, when they are already hosted by
|
|
the GNU project and have decent mirrors in general. I always keep backups of
|
|
these anyway, and do several mirrors, and not including them reduces the
|
|
size of the Libreboot release archives. This means that the release archives
|
|
now require an internet connection to use, because crossgcc tarballs will be
|
|
downloaded at build time, but they are the same tarballs that you would
|
|
download as part of a release anyway, but now if you're only building for
|
|
one coreboot tree within lbmk, you only need to download one set of archives
|
|
instead of getting them all. Patch courtesy of Leah Rowe.
|
|
* `script/build/serprog`: general code cleanup, generalising a lot more code,
|
|
especially the if/else chains for checking what type of firmware is build.
|
|
Patch courtesy of Leah Rowe.
|
|
* main build script: simplified TMPDIR handling. There were cases where the
|
|
TMPDIR variable was already set, and being re-set needlessly. The new code
|
|
is simpler, and less error-prone. Patch courtesy of Leah Rowe.
|
|
* `include/mrc.sh`: general code cleanup, removing dead code and optimising the
|
|
general style of it, to reduce sloccount. Patch courtesy of Leah Rowe.
|
|
* Corresponding to the change below by Riku, the vendor filenames were also
|
|
changed to match the 68\* naming scheme.
|
|
* `config/vendor/sources`: document HP laptop ROM families, for certain models,
|
|
according to name scheme 68SFC, 68SCE, 68ICE and 68ICF. Some of these boards
|
|
iare part of the same families, and use the same blobs. Patch courtesy of
|
|
Riku Viitanen.
|
|
* `script/build/roms`: remove the `modify_coreboot_rom` function. Fake PIKE2008
|
|
ROMs are now inserted by defining option roms in the coreboot config, where
|
|
the given path is `/dev/null`. The *top swap* setting on i945 is now enabled
|
|
via `CONFIG_INTEL_ADD_TOP_SWAP_BOOTBLOCK` in the coreboot build system -
|
|
basically, what this does is cat two identical copies of the bootblock together
|
|
and insert the larger bootblock file (twice the size) at the end of the flash,
|
|
whereas previously we did this in lbmk using dd. The benefit of the new setup
|
|
is that it results in higher build speeds, and now the duplicated bootblock
|
|
now appears in CBFS, so cbfstool will prevent overwriting it.
|
|
* `include/mrc.sh`: Also don't use the dedicated unzip logic in the script.
|
|
Re-use the generic logic provided by `include/git.sh` instead. Patch courtesy
|
|
of Leah Rowe.
|
|
* `include/mrc.sh`: Don't run the shellball provided by Google. Just directly
|
|
run `unzip` instead. The shellball is just a zip file attached to some shell
|
|
logic, that self-decompresses itself. Running unzip directly, gets you the
|
|
same hash, and it's much simpler in lbmk. Patch courtesy of Leah Rowe, after
|
|
the shellball's behaviour was pointed out by Nicholas Chin.
|
|
* `script/update/trees`: Greatly simplified crossgcc handling. Now the list of
|
|
crossgcc targets are directly defined in `target.cfg` files, and the for loop
|
|
in update/trees just goes through it, checking the relevant toolchain. Patch
|
|
courtesy of Leah Rowe.
|
|
* `config/ifd/xx30`: Fixed bad component density count for 16MB setups, and
|
|
reduced chip count from 2 to 1. This should make internal flashing work, on
|
|
X230 setups where the user replaced the two flashes with a single 16MB flash.
|
|
Patch courtesy of Nicholas Chin.
|
|
* **NEW BOARD:** HP EliteBook 8460p support added. Patch courtesy of Riku
|
|
Viitanen.
|
|
* `include/git.sh`: Simplified submodule handling by not using subshells for
|
|
running `cd` to a git repository. Instead, the `-C` option is used in Git.
|
|
* main build script, in the `initialise_command` (now `initcmd`) function:
|
|
simplify handling of arguments, when determining what command was passed,
|
|
and how to run it. Patch courtesy Leah Rowe.
|
|
* `script/update/release`: remove unnecessary "continue" command at the end of
|
|
a for loop.
|
|
* `include/option.sh`: general code cleanup in the `scan_config()` function,
|
|
on the if/else block assigning variables after scanning configs.
|
|
* `include/option.sh`: print errors to stdout instead, on the `item()` function
|
|
* `include/git.sh`: reduced code indentation, on the part that applies patches
|
|
in a git repository.
|
|
* `include/git.sh`: simplify tree name check, by breaking earlier when the
|
|
correct tree name is found on a multi-tree project. Patch courtesy of
|
|
Leah Rowe.
|
|
* `grub.cfg`: Support scanning for *extlinux* configs, which are essentially the
|
|
same as syslinux ones. If found, they are passed through GRUB's syslinux
|
|
parser, which then presents a menu as if it were a GRUB configuration. This
|
|
should increase compatibility with distros that use extlinux, such as
|
|
the Alpine Linux distribution.
|
|
* `grub.cfg`: Handle GRUB *and* syslinux/extlinux configs, on the USB boot menu
|
|
option. Now it scans for both, thus increasing compatibility with many modern
|
|
Linux distro installers. Before this change, Libreboot's design was made with
|
|
BIOS systems in mind, because we historically only supported systems that were
|
|
BIOS-based, whereas GRUB is more common as a bootloader on UEFI-based install
|
|
media, but in the past we mostly assumed isolinux/syslinux for that.
|
|
* `grub.cfg`: support ESP and extlinux setups. The so-called EFI System Partition
|
|
is basically a FAT32 partition that can contain bootloaders and configurations,
|
|
and it is commonly used on some machines that Libreboot supports, prior to
|
|
Libreboot installation. GRUB also supports parsing syslinux configs, and extlinux
|
|
configs are essentially the same. So now Libreboot GRUB automatically scans
|
|
for GRUB *and* syslinux/extlinux configs by default, including on the ESP.
|
|
This will increase compatibility with a wide variety of distros, *without*
|
|
introducing UEFI support yet on x86, because those same Linux kernels can
|
|
also run on bare metal (and this is exactly how it works, when you use GRUB
|
|
as a payload).
|
|
* `grub.cfg`: Don't boot linux unless there is a grub.cfg file provided on
|
|
the HDD/SSD. Previously, a fallback entry existed as a last resort, if all
|
|
else failed, but it made several assumptions that are mostly no longer valid
|
|
in 2023. Patch courtesy of Leah Rowe.
|
|
* `grub.cfg`: scan LVMs first. This makes it more likely that an encrypted
|
|
system (encrypted `/boot`) will boot first, once found and unlocked. Patch
|
|
courtesy of Leah Rowe.
|
|
* `dell-flash-unlock`: in the README, link to several useful guides including
|
|
Open Security Training section about BIOS and SMM internals on x86. Patch
|
|
courtesy of Nicholas Chin. In general, update the README to include instructions
|
|
related to disabling /dev/mem protection, and info about the newer boards
|
|
now added to lbmk, that the utility can be used on.
|
|
* `grub.cfg`: Added BTRFS subvolume support, by default. Patch courtesy of
|
|
the contributor, alias `semigel`.
|
|
* **NEW BOARD:** EDP variant of the ThinkPad X220, for use with eDP mod kits.
|
|
These kits enable use of much nicer, higher resolution screens. We already
|
|
provided a variant of the X230 for this, in lbmk. Patch courtesy of the
|
|
contributor, alias `risapav` (real name not given).
|
|
* lbmk: remove support for the DEBUG environmental variable. It was never very
|
|
useful anyway, and introduced about 10 years ago when the Libreboot build
|
|
system was much less advanced than it is now. We already have much better
|
|
debugging these days, when dealing with build system issues. Patch courtesy
|
|
of Leah Rowe.
|
|
* lbmk scripts: Did a general sweep with shellcheck, fixing errors that it
|
|
flagged, such as lack of double quotes in some places, and non-standard
|
|
behaviour being used. The actual [patch](https://browse.libreboot.org/lbmk.git/commit/?id=1eb4df6748f94a08d44c623a56417199b99b371d)
|
|
shows what is meant by this. Patch courtesy of Leah Rowe.
|
|
* lbmk scripts: Handle exit status correctly, when dealing with subshells. This
|
|
continues on from the other fix below, after doing a sweep of the entire
|
|
build system. Patch courtesy of Leah Rowe.
|
|
* `script/update/trees`: Correctly return error status when `git am` fails,
|
|
while applying patches. Although it was printing an error message, the
|
|
script was making improper use of subshells, leading to a zero exit, when
|
|
it should have exited with non-zero status in such situations. Patch/fix
|
|
courtesy of Leah Rowe.
|
|
* Bumped flashprog revision back to version 1.2, because the 1.4 RC we were
|
|
importing has issues (also, Nico Huber's flashprog will probably be used
|
|
in future releases of Libreboot). Patch courtesy of Leah Rowe.
|
|
* Debian dependencies config: Fixed the freetype dependency, as tested on
|
|
modern Debian Sid
|
|
* GRUB modules: re-added fat/ntfs file system support. Some users on EFI-based
|
|
setups transferring to Libreboot couldn't boot their linux systems, which had
|
|
files installed onto EFI System Partitions. The next release after
|
|
Libreboot 20231106 will once again work correctly on such setups. Patch
|
|
courtesy of Leah Rowe.
|
|
* **GRUB revision:** bumped it to November 2023 revision, which contains
|
|
several important fixes. Look at the [patch](https://browse.libreboot.org/lbmk.git/commit/?id=47ef411efb6b669b7befd2a1cf22f999d4521999)
|
|
for actual fixes, listed in the code import. It's a lot.
|
|
* main build script: set `--author` in Git, when re-initialising the Git
|
|
history on release archives. Patch courtesy of Leah Rowe.
|
|
* lbmk return status: don't rely on return status for unconditional returns.
|
|
There were some parts of lbmk that, in practise, would always exit, but could
|
|
theoretically not, even when they are supposed to, regardless of exit status.
|
|
Patch courtesy of Leah Rowe.
|
|
* lbmk help text: support showing the Libreboot version, project name and
|
|
the version date, based on git metadata. Patch courtesy of Leah Rowe.
|
|
* Re-added GRUB modules: f2fs, json, read, scsi, sleep, diskfilter, hashsum,
|
|
loadenv, setjump - needed on some setups. Patch courtesy of Leah Rowe.
|
|
* `util/nvmutil`: Added useful help dialog, showing usage instructions when
|
|
no/invalid arguments are given. Patch courtesy of Riku Viitanen.
|
|
* Fixed the `util/nvmutil` Makefile, courtesy of Riku Viitanen. It was not
|
|
properly formatted to include `nvmutil.c`, when running make-all.
|
|
* Dell Latitude E6430: Added VBT to CBFS, which was missing in the
|
|
Libreboot 20231106 release. Also enable DRAM clear on boot. Patch courtesy
|
|
of Nicholas Chin.
|
|
* **BOARD ADDED:** Dell Latitude E6530. Courtesy of Nicholas Chin.
|
|
* `config/ifd`: Renamed `e6430` to `dell_ivybridge`, because the files can be
|
|
re-used by other planned ports for Dell latitudes in lbmk. Patch courtesy of
|
|
Nicholas Chin.
|
|
|
|
Exact git log, relative to 20231106:
|
|
|
|
```
|
|
* 11a82163 Bump GRUB to 2.12 release
|
|
* f3098f56 git.sh multi-tree: grab submodules *after* patches
|
|
* 5fb6e36f update/trees: clean up the coreboot-version check
|
|
* 4c9ee172 update/trees: support custom make/autogen argument
|
|
* c6a0e495 update/trees: generic cmake handling
|
|
* 30337b8f update/trees: avoid namespace clash in function
|
|
* b0615581 update/trees: dont hardcode autoconf/bootstrap arg
|
|
* eb3a8e2b unify script/update/trees and script/build/grub
|
|
* 34ded35f lbmk scripts: general code cleanup
|
|
* 4e067799 disable u-boot on x86 qemu
|
|
* bc87b5f6 lbmk scripts: general code cleanup
|
|
* 0c1d08d8 build/serprog: err if basename fails
|
|
* eff9130b update/trees: further simplify crossgcc handling
|
|
* 6752780f coreboot: update hp elitebook configs
|
|
* 15298985 Merge pull request 'Add HP 8300 CMT port' (#173) from Riku_V/lbmk:hp8300cmt into master
|
|
|\
|
|
| * 74147ea4 Add HP 8300 CMT port
|
|
|/
|
|
* 0aca6332 lbmk scripts: shorter code lines
|
|
* 575332f2 fix flashprog build error (implicit enum typecast)
|
|
* b4ab3057 lbmk scripts: general code cleanup
|
|
* 38a7aa31 build/roms: rename two functions for clarity
|
|
* 746d9cad build: remove test command
|
|
* 655d3cdc lbmk scripts: general code cleanup/optimisation
|
|
* 25f9d948 git/pico-serprog: update revision again
|
|
* e0fee7a4 git/pico-serprog: update revision
|
|
* a48b3841 build/roms: improved error handling for roms
|
|
* 33695a56 build/roms: remove redundant check
|
|
* d5f8f657 dell/e6400nvidia_4mb: new configuration (nvidia)
|
|
* 9d5d98eb set version/projectname properly
|
|
* aa525142 update/trees: fix infinite loop
|
|
* 465077bc vendor/download: check whether configs exist first
|
|
* 39293279 vendor/inject: fix dodgy error check (cd command)
|
|
* f44b99c8 don't delete microcode updates in rom images
|
|
* 72cd169e update/release: don't test ./vendor inject
|
|
* e8eb52f8 update/release: don't insert crossgcc tarballs
|
|
* b0e5fc9d lbmk scripts: general code cleanup
|
|
* b111f484 build/serprog: general code cleanup
|
|
* 2f98ca6d build: simplified TMPDIR handling
|
|
* ab65ea4c general code cleanup
|
|
* fa25414b mrc.sh: run debugfs from extract_partition
|
|
* 8a875722 mrc.sh: general code cleanup
|
|
* 12e644b3 Merge pull request 'hp-ec-fw' (#172) from Riku_V/lbmk:hp-ec-fw into master
|
|
|\
|
|
| * 584c66e9 rename hp elitebook ec fw after rom families
|
|
| * f7fda791 document hp laptop rom families
|
|
|/
|
|
* 92986f0c build/roms: remove modify_coreboot_rom()
|
|
* 493ebdfb mrc.sh: remove redundant extraction logic
|
|
* 1153bc3b mrc.sh: don't run the shellball. use unzip.
|
|
* 28dfd91a Merge pull request 'hp8460pintel: actually enable vbt' (#171) from Riku_V/lbmk:vbt8460p into master
|
|
|\
|
|
| * aa4160e3 hp8460pintel: actually enable vbt
|
|
|/
|
|
* 3ccf1941 update coreboot configs
|
|
* 95788059 update/trees crossgcc: call err if arch isn't set
|
|
* 90ac30b1 update/trees: simplified crossgcc handling
|
|
* 4711098e Merge pull request 'config/ifd/xx30: Fix 16_ifd component density and count' (#170) from nic3-14159/lbmk:xx30_16_ifd_fix into master
|
|
|\
|
|
| * dbec5bf3 config/ifd/xx30: Fix 16_ifd component density and count
|
|
* | 4fb48595 Merge pull request 'Add HP EliteBook 8460p' (#169) from Riku_V/lbmk:hp8460p into master
|
|
|\ \
|
|
| |/
|
|
|/|
|
|
| * b0b4f86b Add HP EliteBook 8460p
|
|
* | 7f98ab8e git.sh: simplify submodule handling
|
|
* | 124b5beb build initialise_command: simplify handling
|
|
* | 9c00746b update/release: minor cleanup
|
|
* | f6ebab57 option.sh scan_config: clean up if/else block
|
|
* | 3b7009aa option.sh: print error on stderr, not stdout
|
|
* | c75ca20c option.sh: don't rely on zero status on printf
|
|
* | 578f105d git.sh git_am_patches: reduce indentation
|
|
* | cbd19d81 git.sh fetch_config: simplify tree name check
|
|
|/
|
|
* b9f69f26 grub.cfg syslinux: support scanning /boot/EFI/
|
|
* 766bb46c grub.cfg: fix path
|
|
* 430918ee grub.cfg: handle btrfs subvols for extlinux.conf
|
|
* d74c6c71 grub.cfg: scan extlinux/extlinux.conf
|
|
* f1d6c143 grub.cfg: support grub and extlinux on ata/ahci
|
|
* 6db94c1a grub.cfg: merge isolinux/grub usb menuentries
|
|
* c4544e04 grub.cfg: handle extlinux in the default menuentry
|
|
* eaa1341b grub.cfg syslinux: support ESP and extlinux.conf
|
|
* b817001e grub.cfg: don't boot linux without a grub.cfg
|
|
* 2d6e5ca4 grub.cfg: scan lvm volumes last
|
|
* 49eed9ac Revert "grub.cfg: try luks2/crypto-lvm before non-crypto"
|
|
* aed4dff8 Merge pull request 'Dell-flash-unlock README updates from upstream' (#168) from nic3-14159/lbmk:dell-flash-unlock-updates into master
|
|
|\
|
|
| * d207e9bc README.md: Add possibly not working systems
|
|
| * ab59f912 README.md: Add E6500, E6420, and E6530 as supported
|
|
| * ca28255d README.md: Add instructions for relaxing memory permissions
|
|
| * f4819081 README.md: Add references to Open Security Training
|
|
* | 20389655 grub.cfg: try luks2/crypto-lvm before non-crypto
|
|
* | 3a36c827 Merge pull request 'master' (#165) from risapav/lbmk:master into master
|
|
|\ \
|
|
| * | 15226f9e added x220edp_8mb
|
|
| * | 1c337ac7 added x220edp_8mb
|
|
| * | e6629606 added x220edp_8mb
|
|
| |/
|
|
* | 0a8ef113 Merge pull request 'Update config/grub/config/grub.cfg' (#167) from semigel/lbmk:semigel-btrfs-subvol-patch-1 into master
|
|
|\ \
|
|
| |/
|
|
|/|
|
|
| * ababbc09 Update config/grub/config/grub.cfg
|
|
|/
|
|
* 39a3de57 remove DEBUG handling in lbmk (not needed)
|
|
* 1eb4df67 fix several shellcheck warnings
|
|
* 54ca5f24 Merge pull request 'config/dependencies/debian: add unifont-bin & xfonts-unifont' (#163) from Riku_V/lbmk:debgrub into master
|
|
|\
|
|
| * 2e6073f2 config/dependencies/debian: add unifont-bin & xfonts-unifont
|
|
* | 2e779a54 handle errors on exits from subshells
|
|
* | 9558e2fc improved safety/error handling on multitree git-am
|
|
* | 7af200a1 Merge pull request 'fix void dependencies: openssl-devel' (#161) from Riku_V/lbmk:fixvoid into master
|
|
|\|
|
|
| * 6d8d2e75 fix void dependencies: openssl-devel
|
|
|/
|
|
* cb3fad07 Merge pull request 'fix void dependencies: freetype-devel' (#160) from Riku_V/lbmk:fixvoid into master
|
|
|\
|
|
| * 01a82431 fix void dependencies: freetype-devel
|
|
|/
|
|
* 5a6dec97 Merge pull request 'fix void dependencies typo' (#159) from Riku_V/lbmk:fivoid into master
|
|
|\
|
|
| * 50bfe1ca fix void dependencies typo
|
|
|/
|
|
* 4e00ac00 revert flashprog back to version 1.2
|
|
* 83c8248f dependencies/debian: fix libfreetype-dev
|
|
* 39aad578 grub: re-add fat/nt file system modules
|
|
* 47ef411e Bump GRUB revision to 8 November 2023 revision
|
|
* ce1176f5 fix typo in help text
|
|
* 70882902 build: set --author when running git init
|
|
* 5af3ae05 lbmk: don't use status for unconditional returns
|
|
* 64f93374 lbmk: support showing the revision in help text
|
|
* f4b2a588 build: don't generate version/versiondate as root
|
|
* c4d90087 add grub mods: diskfilter,hashsum,loadenv,setjmp
|
|
* d0d6decb re-add grub modules: f2fs, json, read, scsi, sleep
|
|
* f60286a3 Merge pull request 'Dell Latitude E6530 support' (#151) from nic3-14159/lbmk:e6530 into master
|
|
|\
|
|
| * 36d4c906 Add Dell Latitude E6530 support
|
|
| * 8bb95639 config/ifd: Rename e6430 to dell_ivybridge
|
|
* 4d7cb99c Merge pull request 'config/coreboot/e6430_12mb: Fix configs' (#150) from nic3-14159/lbmk:e6430-config-fixes into master
|
|
|\
|
|
| * a02c7e31 config/coreboot/e6430_12mb: Fix configs
|
|
* d3ade208 Merge pull request 'nvmhelp' (#152) from Riku_V/lbmk:nvmhelp into master
|
|
* 86608721 nvmutil: print usage
|
|
* f12f5c3a nvmutil: fix makefile
|
|
```
|
|
|
|
This is 117 changes, since Libreboot 20231106.
|