* Shows confirmed status in list.
* Adds ability to confirm users in admin UI.
* Added new english translations.
* Addresses feedback from #2245.
* More feedback.
- Deleting a toot
- Muting, blocking someone
- Clearing notifications
Remove source map generation from development environment, as it is a huge
performance sink hole with little gains
The previous translation for NSFW, "不適切" means "impertinent". This change
suggests "閲覧注意", which means the content requires precaution, instead.
However, "閲覧注意" was also a translation for CW. CW is now translated as
"警告", which simply means "warnings".
The force_ssl method from controllers does not add all of the options that the
sitewide configuration in a config block does. For example, HSTS enforcement is
not added by the controller method, but is added by this style.
* Add spec coverage for settings/two_factor_auth area
* extract setup method for qr code
* Move otp required check to before action
* Merge method only used once
* Remove duplicate view
* Consolidate creation of @codes for backup
* Move settings/2fq#recovery_codes to settings/recovery_codes#create
* Rename settings/two_factor_auth#disable to #destroy
* Add coverage for the otp required path on 2fa#show
* Clean up the recovery codes list styles
* Move settings/two_factor_auth to settings/two_factor_authentication
* Reorganize the settings two factor auth area
Updated to use a flow like:
- settings/two_factor_authentication goes to a #show view which has a button
either enable or disable 2fa on the account
- the disable button turns off the otp requirement for the user
- the enable button cycles the user secret and redirects to a confirmation page
- the confirmation page is a #new view which shows the QR code for user
- that page posts to #create which verifies the code, and creates the recovery
codes
- that create action shares a view with a recovery codes controller which can be
used separately to reset codes if needed
* Allow puma to listen Unix socket
* streaming: Show the whole listening address instead of the port
Port is not always appropriate (e.g. Unix socket)
* streaming: Close server before exiting
This change especially allows to remove Unix socket before exiting.
* add Indonesian (Bahasa Indonesia) translation
add id.jsx
add translations on email views
add devise.id.yml
add doorkeeper.id.yml
add id.yml
add simple_form.id.yml
update id locale on mastodon.jsx, index.jsx, settings_helper.rb, and
application.rb
* add Indonesian (Bahasa Indonesia) translation
add id.jsx
add translations on email views
add devise.id.yml
add doorkeeper.id.yml
add id.yml
add simple_form.id.yml
update id locale on mastodon.jsx, index.jsx, settings_helper.rb, and
application.rb
* fix InvalidLocaleData on a string
* fix InvalidLocaleData on a string
* Fix language keys in Indonesian ruby locale (id)
Use "id" instead of "en" as object keys.
* Removed obsoleted translation (id)
* A bit of more explanation
* Update nl.yml
* That's more elegant
* More consistent and adding missing translation
* Update
* Update
* Added Dutch onboarding modal strings
This commit provides a heavy proofreading of zh-CN translations, and
mainly draws from the zh-HK source when a translation is found too
incoherent. Translating directly from en is used when zh-HK translation
is not available.
This commit also completes the tweet-toot (choo-choo, actually) for
zh-cn introduced in #2044. Some minor copyediting, as well as
additional en translations, has been fed back into zh-hk text.
* Add routing specs for accounts followers and following actions
* Use more restful route naming for public account follow pages
Moves two actions:
- accounts#followers to accounts/follower_accounts#index
- accounts#following to accounts/following_accounts#index
Adds routing spec to ensure prior URLs are preserved.
* Add rate limits for logins and sign-ups by IP (5 in 5 minutes)
Should be enough for normal attempts
* Add rate limit for forgotten password form as well
* Add a ReportFilter class
* Add reports and targeted_reports relationships to Account
* Use ReportFilter from admin/reports controller
* Link to admin/reports filtered views from admin account show view
* Add indexes to reports.account_id and reports.target_account_id
* Added oc.yml
* Added `config/locales/oc.yml`.
Translated in General Occitan (Quent-in).
* Added oc.jsx (Occitan translation)
* Written in General Occitan (lengadocian)
* Added `app/assets/javascripts/components/locales/oc.js`
* Added doorkeeper.oc.yml
* Added `config/locales/doorkeeper.oc.yml` (Quent-in)
* Added simple_form.oc.yml
* Added `config/locales/simple_form.oc.yml` (Quent-in).
* Merge en.yml changes into oc.yml
Added new strings for translations
* Fix typo in oc.yml
* Update javascript locale support (oc)
* Update ruby locale list (oc)
* Fix oc.yml
* Remove obsoleted translations
* Moved old translation of `reports` to `admin.reports`
* Fixed some words
* Improved and more consistent
* Fixes and a bit less 'je'
* Improved and more consistent
* Another round of improvements and consistency
* More improvements and less 'je'
* Update
* Updated with admin strings
* More improvements and additions - not complete yet, but most is there
* This is what we call in Dutch 'the English disease' :-)
* fix comma
* admin.reportsi
* not needed
* hopefully now fixed
This change includes:
- Improve the spec coverage for incoming request to the webfinger action
- For requests without an accept header (ie, what a browser might look like),
return a JSON response.
- For requests with an explicit format of xml or json, return that format.
- For requests using an accept header, return that format.
Also adds failing spec showing webfinger does not return xml, which covers the
issue described in: https://github.com/tootsuite/mastodon/issues/1983
This introduces a new per-user preference called
"Auto-play animated GIFs", which is enabled by default. When a
user disables this setting, gifs in toots become click-to-play.
Previews of animated gifs were changed to display the video play
button so that users can distinguish them from regular images.
This setting also affects account avatars in the detailed account
view, which was changed to use the same hover-to-play mechanism
that is used for animated avatars in timelines.
Fixes#1652
* Allow using an SMTP server without authentication (e.g Postfix relay on the same host) by setting SMTP_LOGIN and SMTP_AUTH_METHOD to 'none'
* Add note in .env.production.sample about SMTP settings for servers where no auth is required
* Assume that SMTP_LOGIN and SMTP_PASSWORD will be blank if we set SMTP_AUTH_METHOD to none
* Rename admin.domain_block to admin.domain_blocks in prep for i18n improvement
* Use implicit controller/action path for i18n in admin/domain_blocks
* Add DomainBlock#accounts has_many
* Avoid i18n health warning for `en` locale by using symbol scope with :count
* Remove unused i18n key: plaintext_secret_html
* Remove unused i18n key two_factor_auth.warning
* Remove final will_paginate i18n keys
* Remove unused key two_factor_auth.recovery_codes
* Remove unused key: admin.reports.comment.none
* Remove unused reports. i18n namespace (moved to admin.reports)
* Ignore keys from locales which override activemodel and activerecord errors
* Revert "Remove unused key: admin.reports.comment.none"
This reverts commit 350ef2685fadc069e619bb6d1066190de195d942.
* Update i18n key reference to match moved location
* Add missing `en` keys to i18n
* Tell i18n-tasks to ignore missing attributes that dont need overwriting
* Add i18n-tasks unused to travis
Create MediaAttachment but without actual file download when domain is blocked with reject_media set to true
Clean up old media files when creating a new domain block with reject_media set to true
Return remote_url in media attachments API if local file is not present
Undo domain block action in admin UI
Ability to enable reject_media from admin UI
* User can create a custom.scss to customize their instance without modifying gitted files.
* Add documentation for customization.
* Forgot the helper file
* Fix Style to pass codeclimate
* Requests from maintainer.
* Add recovery code support for two-factor auth
When users enable two-factor auth, the app now generates ten
single-use recovery codes. Users are encouraged to print the codes
and store them in a safe place.
The two-factor prompt during login now accepts both OTP codes and
recovery codes.
The two-factor settings UI allows users to regenerated lost
recovery codes. Users who have set up two-factor auth prior to
this feature being added can use it to generate recovery codes
for the first time.
Fixes#563 and fixes#987
* Set OTP_SECRET in test enviroment
* add missing .html to view file names
* Working translation for Norwegian.
* Fixes to Norwegian translation.
* Further adjustments to Norwegian translation.
* Further adjustments to Norwegian translation.
* Yet more improvements to the Norwegian translation.
* More Norwegian translations. Better terminology.
This value was changed recently, and every locale which had it set was using the
same value as the default. This value is still the default in the new location.
* Polish translation (needs more love though)
* Polish translation bugfix
* bugfix for new colon-containing texts
* another bugfix. yaml is evil
* minor fix
* fixing issues pointed out by reviewers
* Uwierzytelnianie dwustopniowe -> dwuetapowe, as suggested by a reviewer
* Etyczny dizajn zbyt sarkastyczny, to będą założenia
* Allow running mastodon on a different domain as the one used for identifying users
* Alter documentation of WEB_DOMAIN to make clear it shouldn't be used unless the admin knows what they are doing
* Compare to web_domain instead of local_domain when dealing with feeds/API
* Correctly identify mentions to local accounts
Mentions URLs point to the person's web profile, i.e., the user page served on WEB_DOMAIN.
* Simplify admin/reports controller filtering for index
* Rename parameter to resolved
* Fix issue where reports view could not access filter_link_to
* Add coverage for admin/reports controller
* DRY up resolution of related reports for target account
* Clean up admin/reports routes
* Add Report#statuses method
* DRY up current account action taken params
* Rubocop styles
* Add translation files and declarations for Bulgarian
* Add a bunch of translations to bg.jsx
* Add rest of translations to bg.jsx
* Add devise translations
* Fix devise translations
* Add request spec for host meta route returning xml
* Add routing spec for xrd routes
* Update well-known routes
* Move webfinger and host-meta actions to their own controllers
* Remove unused account_params method in admin/accounts controller
* Introduce AccountFilter to find accounts
* Use AccountFilter in admin/accounts controller
* Use more restful routes admin silence and suspension area
* Add admin/silences and admin/suspensions controllers
* Working translation for Norwegian.
* Fixes to Norwegian translation.
* Further adjustments to Norwegian translation.
* Further adjustments to Norwegian translation.
* Added missing Spanish translations strings
* fix bad translation
* resolve conflict with tootsuite/master
* agreements from spanish community
* Add some missing strings
* Make Reporting admin section translatable
And translate it into english and french
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* Make subject of emails translatable and improve french translation
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* Make error pages translatable and translate them in english and french
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* Translate site setting section
* Insert instance in registration emails and improve them a bit
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* Added Chinese Traditional Hong Kong (zh-HK) for Ruby
* Added translations for Ruby.
* Added Chinese Traditional Hong Kong (zh-HK) for JS
* Added translations for javascript code.
* Rearrange language references in mastodon.jsx
* Break `addLocaleData` into multiple lines. Make future commit more readable.
* Roughly re-sort the languages in alphabetical orders
(only manually put English on top because it is default).
* Sort application.rb locale with alphabetical order
With exception that English (default language) goes first.
Improve code readability.
* Resort language selection box alphabetically
Sort HUMAN_LOCALES in the alphabetical order of display name
(except English, the default language, come first).
Improve usability.
* Add basic coverage for settings/exports controller
* Remove unused @account variable from settings/exports controller
* Add coverage for download export actions
* Remove deprecated `render :text` in favor of `send_data` for csv downloads
* Add model to handle exports
* Use Export class in settings/exports controller
* Simplify settings/exports controller methods
* Move settings/export to more restful routes
* Update devise.fr.yml fixing minor typos
* add missing strings
* Fix a translation and add translation for devise part
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* update faq with default language
* update translation for about page
* update Minio config
Thanks to @Gargon for helping me. I hope this will help others as well
* update import and export translation
* translate emails to finnish
* add finnish translation for emails
* add finnish translation for emails
* add finnish translation
* add missing dot
* update finnish language to emails
* add finnish translation for emails
* add dot and fix typo
* updated some minor typos
* remove language change due breaking emails
And by dev request
* updated minio config by dev request
* updated about page translation
* fix for Amazon S3/Minio instance setups
If you were using S3 or Minio for your files, this will fix the Import issue :)
* update translation according to issue #1515
See issue #1515
* update translation for issue #1515
see issue #1515
* Replace will_paginate with kaminari
* Use #page instead of #paginate in controllers
* Replace will_paginate.page_gap with pagination.truncate in i18n
* Customize kaminari views to match prior styles
* Set kaminari options to match prior behavior
* Replace will_paginate with paginate in views
* Update rspec-rails to version 3.5.2
* Update addressable to version 2.5.1
* Update autoprefixer-rails to version 6.7.7.1
* Update bullet to version 5.5.1
* Update domain_name to version 0.5.20170404
* Update letter_opener_web to version 1.3.1
* Upate redis-rails to version 5.0.2
* Update active_record_query_trace to version 1.5.4
* Update capistrano-rails to version 1.2.3
* Update dotenv-rails to version 2.2.0
* Update pg to version 0.20.0
* Update tilt to version 2.0.7
* Update warden to version 1.2.7
* Update tins to version 1.13.2
* Update terminal-table to version 1.7.3
* Update oj to version 2.18.5
* Update simplecov to version 0.14.1
* Update uglifier to version 3.1.13
* Update hashdiff to version 0.3.2
* Update webmock to version 2.3.2
* Update devise to version 4.2.1
* Use ruby version 2.4.1
* Update sass to version 3.4.23
* Update puma to version 3.8.2
* Update will_paginate to version 3.1.5
* Update font-awesome-rails to version 4.7.0.1
* Update fuubar to version 2.2.0
* Update pry-rails to version 0.3.6
* Update simple-navigation to version 4.0.5
* Update rubocop to version 0.48.1
* Update doorkeeper to version 4.2.5
* Update faker to version 1.7.3
* Update aws-sdk to version 2.9.5
* Update fabrication to version 2.16.1
* Update hamlit-rails to version 0.2.0
* Update http to version 2.2.1
* Update httplog to version 0.99.2
* Update sidekiq to version 4.2.10
* Update rspec-sidekiq to version 3.0.0
* Update pghero to version 1.6.4
* Update rack-cors to version 0.4.1
* Update i18n-tasks to version 0.9.13
* Update ruby-oembed to version 0.12.0
* Update jquery-rails to version 4.3.1
* Update simple_form to version 3.4.0
* Update react-rails to version 1.11.0
* Update aws-sdk to version 2.9.6
* Update sidekiq-unique-jobs to version 5.0.0
* Update uglifier to version 3.2.0
* Allow SMTP auth method customization
* Add SMTP openssl_verify_mode option support
Allows one use self-signed certs with their SMTP server.
* Add SMTP enable_starttls_auto option support
* Put a useful message for new admins on /about/more
I totally failed to realize this file was just defaults. I think
this message would be a good default for people like me.
* Revert default site description, expand comment
This will keep setup-related stuff from leaking into public views,
while still hopefully keeping over-eager admins from editing this
file unnecessarily before RTFMing. (e.g., me)
* Allow users to update their Account in the API
It would be nice for API clients to be able to allow users to update
their accounts without having to wrap Mastodon in a web view. This patch
adds an API endpoint to let users submit a PATCH for their account.
Signed-off-by: David Celis <me@davidcel.is>
* Add /api/v1/accounts/update_credentials to the API docs
Signed-off-by: David Celis <me@davidcel.is>
* Update confirmation_instructions.fr.html.erb
consistency across the French translation
* Update
consistency across the French translation
* Update fr.yml
a bunch of consistency across the French translation + a few typos
* Update doorkeeper.fr.yml
consistency across the French translation (punctuation)
A request to `/test` would show the custom 404 page, but a request to
`/test.test` would return a 404 with an empty body.
This change ignores the format on incoming catch all route requests, so that the
html 404 page is returned on these requests.
Add french translation for emails sent
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
Add non-breaking spaces
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
changes and fixes to the nbsps
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
French update
a few fixes
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
fixes
Signed-off-by: Thomas Citharel <tcit@tcit.fr>
* update faq with default language
* update translation for about page
* update Minio config
Thanks to @Gargon for helping me. I hope this will help others as well
* update import and export translation
* translate emails to finnish
* add finnish translation for emails
* add finnish translation for emails
* add finnish translation
* add missing dot
* update finnish language to emails
* add finnish translation for emails
* add dot and fix typo
* updated some minor typos
* remove language change due breaking emails
And by dev request
* updated minio config by dev request
* updated about page translation
Setting of locale in controller extracted to Localized concern,
the doorkeeper authorized applications controller moved under
custom namespace with inclusion of Localized, which resolves the
"it sometimes appears in a different random language" bug
If an :original gets converted into another format, it would get saved as
original_filename *anyway*, so generating the extension is pointless and
yields bad results for when you change the style definition later. This way,
old gifs will still have correct URLs
before. In the API, attachments now can be either image, video or gifv. Gifv
is to be treated like images in terms of behaviour, but are videos by file
type.
to only those from local users; Add link to "extended information" to
getting started in the UI; Add defaults for posting privacy; Change
how publish button looks depending on posting privacy chosen
work flawlessly was a nightmare). WARNING: This commit makes the web UI connect to the streaming API instead
of ActionCable like before. This means that if you are upgrading, you should set that up beforehand.
Federate spoiler_text using warning attribute on <content /> instead of a <category term="spoiler" />
Clean up schema file from accidental development migrations
application website validation, don't link to app website if website isn't set,
also comment out animated boost icon from #464 until it's consistent with non-animated version
for avatars/headers, resize avatars down to 120x120 instead of 300x300. Set cache headers on S3 stuff, also
make it private (aka only accessible via expiring links to prevent hotlinking)
resources that require a user context vs those that don't (such as public timeline)
/api/v1/statuses/public -> /api/v1/timelines/public
/api/v1/statuses/home -> /api/v1/timelines/home
/api/v1/statuses/mentions -> /api/v1/timelines/mentions
/api/v1/statuses/tag/:tag -> /api/v1/timelines/tag/:tag
Ash Furrow