smol/po/zh_CN.po

# Simplified Chinese Messages for the nano editor
# Copyright (C) 2004, 2005, 2009 Free Software Foundation, Inc.
# This file is distributed under the same license as the nano package.
# LI Daobing <lidaobing@gmail.com>, 2007, 2008, 2009.
msgid ""
msgstr ""
"Project-Id-Version: nano 2.1.9pre1\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-02-16 23:08-0500\n"
"PO-Revision-Date: 2009-02-14 14:32+0800\n"
"Last-Translator: Li Daobing <lidaobing@gmail.com>\n"
"Language-Team: Chinese (simplified) <translation-team-zh-cn@lists."
"sourceforge.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: src/browser.c:220
msgid "Go To Directory"
msgstr "跳至目录"

#: src/browser.c:233 src/browser.c:830 src/files.c:790 src/files.c:1931
#: src/nano.c:1035 src/search.c:220 src/search.c:314 src/search.c:975
#: src/search.c:1040
msgid "Cancelled"
msgstr "已取消"

#: src/browser.c:266 src/browser.c:314
#, c-format
msgid "Can't go outside of %s in restricted mode"
msgstr "在限制模式中无法至 %s 外部"

#: src/browser.c:277 src/browser.c:324 src/browser.c:347 src/files.c:652
#: src/files.c:661 src/files.c:1455 src/files.c:1546 src/files.c:1594
#: src/files.c:1615 src/files.c:1738 src/files.c:2571 src/rcfile.c:502
#: src/rcfile.c:1133
#, c-format
msgid "Error reading %s: %s"
msgstr "读取 %s 时发生错误: %s"

#: src/browser.c:303
msgid "Can't move up a directory"
msgstr "无法上移一个目录"

#. TRANSLATORS: Try to keep this at most 7
#. * characters.
#: src/browser.c:665 src/browser.c:674
msgid "(dir)"
msgstr "(目录)"

#. TRANSLATORS: Try to keep this at most 12
#. * characters.
#: src/browser.c:671
msgid "(parent dir)"
msgstr "(父目录)"

#: src/browser.c:801 src/search.c:185
msgid "Search"
msgstr "搜寻"

#. TRANSLATORS: This string is just a modifier for the search
#. * prompt; no grammar is implied.
#: src/browser.c:805 src/search.c:189
msgid " [Case Sensitive]"
msgstr " [符合大小写]"

#. TRANSLATORS: This string is just a modifier for the search
#. * prompt; no grammar is implied.
#: src/browser.c:811 src/search.c:195
msgid " [Regexp]"
msgstr " [正则表示式]"

#. TRANSLATORS: This string is just a modifier for the search
#. * prompt; no grammar is implied.
#: src/browser.c:817 src/search.c:201
msgid " [Backwards]"
msgstr " [向后搜寻]"

#: src/browser.c:909 src/browser.c:917 src/search.c:395
msgid "Search Wrapped"
msgstr "已从头搜寻"

#: src/browser.c:1006 src/browser.c:1039 src/search.c:514 src/search.c:517
#: src/search.c:574 src/search.c:577
msgid "This is the only occurrence"
msgstr "这是惟一出现之处"

#: src/browser.c:1042 src/search.c:583
msgid "No current search pattern"
msgstr "没有当前搜索模式"

#: src/files.c:125
#, c-format
msgid "Can't insert file from outside of %s"
msgstr "无法插入 %s 外部的文件"

#: src/files.c:234
msgid "No more open file buffers"
msgstr "无多余文件缓冲区可开启"

#: src/files.c:250
#, c-format
msgid "Switched to %s"
msgstr "切换至 %s"

#: src/files.c:251 src/global.c:466 src/winio.c:2168
msgid "New Buffer"
msgstr "新缓冲区"

#: src/files.c:583
#, c-format
msgid "Read %lu line (Converted from DOS and Mac format)"
msgid_plural "Read %lu lines (Converted from DOS and Mac format)"
msgstr[0] "已读取 %lu 行 (转换自 DOS 与 Mac 格式)"

#: src/files.c:588
#, c-format
msgid "Read %lu line (Converted from Mac format)"
msgid_plural "Read %lu lines (Converted from Mac format)"
msgstr[0] "已读取 %lu 行 (转换自 Mac 格式)"

#: src/files.c:593
#, c-format
msgid "Read %lu line (Converted from DOS format)"
msgid_plural "Read %lu lines (Converted from DOS format)"
msgstr[0] "已读取 %lu 行 (转换自 DOS 格式)"

#: src/files.c:598
#, c-format
msgid "Read %lu line"
msgid_plural "Read %lu lines"
msgstr[0] "已读取 %lu 行"

#: src/files.c:630 src/files.c:666
msgid "Reading File"
msgstr "正在读取文件"

#: src/files.c:636
msgid "New File"
msgstr "新文件"

#: src/files.c:639
#, c-format
msgid "\"%s\" not found"
msgstr "找不到 \"%s\""

#: src/files.c:647 src/rcfile.c:493 src/rcfile.c:1083 src/rcfile.c:1124
#, c-format
msgid "\"%s\" is a directory"
msgstr "\"%s\" 是一个目录"

#: src/files.c:648 src/rcfile.c:494 src/rcfile.c:1084 src/rcfile.c:1125
#, c-format
msgid "\"%s\" is a device file"
msgstr "\"%s\" 是一个设备文件"

#: src/files.c:747
#, c-format
msgid "Command to execute in new buffer [from %s] "
msgstr "在新缓冲区中执行的命令 [从 %s] "

#: src/files.c:749
#, c-format
msgid "Command to execute [from %s] "
msgstr "执行的命令 [从 %s] "

#: src/files.c:755
#, c-format
msgid "File to insert into new buffer [from %s] "
msgstr "所要插入新缓冲区的文件 [从 %s] "

#: src/files.c:757
#, c-format
msgid "File to insert [from %s] "
msgstr "所要插入的文件 [从 %s] "

#: src/files.c:1001
msgid "Key invalid in non-multibuffer mode"
msgstr "非多重缓冲区模式中此按键无效"

#: src/files.c:1409
#, c-format
msgid "Can't write outside of %s"
msgstr "无法写入 %s 外部"

#: src/files.c:1424
msgid "Cannot prepend or append to a symlink with --nofollow set"
msgstr "--nofollow 设定下，无法前引或附加至符号连结档"

#: src/files.c:1496 src/files.c:1521 src/files.c:1550
#, c-format
msgid "Error writing backup file %s: %s"
msgstr "写入备份文件 %s 时发生错误: %s"

#: src/files.c:1497 src/nano.c:692
msgid "Too many backup files?"
msgstr "太多备份文件？"

#: src/files.c:1570 src/files.c:1627 src/files.c:1646 src/files.c:1658
#: src/files.c:1682 src/files.c:1700 src/files.c:1710 src/files.c:1746
#: src/files.c:1751 src/files.c:2644 src/files.c:2653
#, c-format
msgid "Error writing %s: %s"
msgstr "写入 %s 时发生错误: %s"

#: src/files.c:1604 src/text.c:2851 src/text.c:2863
#, c-format
msgid "Error writing temp file: %s"
msgstr "写入暂存文件 %s 时发生错误"

#: src/files.c:1783
#, c-format
msgid "Wrote %lu line"
msgid_plural "Wrote %lu lines"
msgstr[0] "已写入 %lu 行"

#: src/files.c:1887
msgid " [DOS Format]"
msgstr " [DOS 格式]"

#: src/files.c:1888
msgid " [Mac Format]"
msgstr " [Mac 格式]"

#: src/files.c:1890
msgid " [Backup]"
msgstr " [备份]"

#: src/files.c:1898
msgid "Prepend Selection to File"
msgstr "前引选择部份于文件"

#: src/files.c:1899
msgid "Append Selection to File"
msgstr "附加选择部份至文件"

#: src/files.c:1900
msgid "Write Selection to File"
msgstr "写入选择部份至文件"

#: src/files.c:1903
msgid "File Name to Prepend to"
msgstr "要前引于的文件名称"

#: src/files.c:1904
msgid "File Name to Append to"
msgstr "要附加至的文件名称"

#: src/files.c:1905
msgid "File Name to Write"
msgstr "要写入的文件名称"

#: src/files.c:2036
msgid "File exists, OVERWRITE ? "
msgstr "文件已存在，要覆盖吗？"

#: src/files.c:2045
msgid "Save file under DIFFERENT NAME ? "
msgstr "以不同的名称存档？"

#: src/files.c:2053
msgid "File was modified since you opened it, continue saving ? "
msgstr "在你打开文件后文件已被改变，是否继续保存？"

#: src/files.c:2491
msgid "(more)"
msgstr "(更多)"

#: src/files.c:2574 src/rcfile.c:1149
#, c-format
msgid ""
"\n"
"Press Enter to continue starting nano.\n"
msgstr ""
"\n"
"按下回车键继续启动 nano\n"

#: src/global.c:412 src/prompt.c:1290
msgid "Cancel"
msgstr "取消"

#: src/global.c:415
msgid "Case Sens"
msgstr "依大小写"

#: src/global.c:416
msgid "Backwards"
msgstr "向后搜索"

#: src/global.c:420
msgid "Regexp"
msgstr "正则表达式"

#. TRANSLATORS: Try to keep the next five strings at most 10 characters.
#: src/global.c:446
msgid "PrevHstory"
msgstr "历史记录"

#: src/global.c:447
msgid "NextHstory"
msgstr "历史记录"

#: src/global.c:448
msgid "Replace"
msgstr "替换"

#: src/global.c:449
msgid "No Replace"
msgstr "不替换"

#: src/global.c:450
msgid "Go To Text"
msgstr "跳至文字"

#. TRANSLATORS: Try to keep the next three strings at most 12 characters.
#: src/global.c:452
msgid "WhereIs Next"
msgstr "何处是下一个"

#: src/global.c:454
msgid "First File"
msgstr "首文件"

#: src/global.c:455
msgid "Last File"
msgstr "末文件"

#. TRANSLATORS: Try to keep the next nine strings at most 16 characters.
#: src/global.c:457
msgid "To Files"
msgstr "文件选单"

#: src/global.c:459
msgid "DOS Format"
msgstr "DOS 格式"

#: src/global.c:460
msgid "Mac Format"
msgstr "Mac 格式"

#: src/global.c:461
msgid "Append"
msgstr "附加"

#: src/global.c:462
msgid "Prepend"
msgstr "前引"

#: src/global.c:463
msgid "Backup File"
msgstr "备份文件"

#: src/global.c:464
msgid "Execute Command"
msgstr "执行命令"

#: src/global.c:468
msgid "Go To Dir"
msgstr "跳至目录"

#. TRANSLATORS: Try to keep the following strings at most 10 characters.
#: src/global.c:477
msgid "Get Help"
msgstr "求助"

#: src/global.c:478
msgid "Exit"
msgstr "离开"

#: src/global.c:479
msgid "Where Is"
msgstr "搜寻"

#: src/global.c:480
msgid "Prev Page"
msgstr "上页"

#: src/global.c:481
msgid "Next Page"
msgstr "下页"

#: src/global.c:482
msgid "First Line"
msgstr "首行"

#: src/global.c:483
msgid "Last Line"
msgstr "尾行"

#: src/global.c:484
msgid "Suspend"
msgstr "暂停"

#: src/global.c:486
msgid "Beg of Par"
msgstr "段落开头"

#: src/global.c:487
msgid "End of Par"
msgstr "段落结尾"

#: src/global.c:488
msgid "FullJstify"
msgstr "全部对齐"

#: src/global.c:490
msgid "Refresh"
msgstr "重新显示"

#: src/global.c:491
msgid "Insert File"
msgstr "插入文件"

#: src/global.c:492
msgid "Go To Line"
msgstr "跳行"

#: src/global.c:495
msgid "Justify the current paragraph"
msgstr "对齐当前段落"

#. TRANSLATORS: The next long series of strings are shortcut descriptions;
#. * they are best kept shorter than 56 characters, but may be longer.
#: src/global.c:500
msgid "Cancel the current function"
msgstr "取消当前功能"

#: src/global.c:501
msgid "Display this help text"
msgstr "显示帮助"

#: src/global.c:504
msgid "Close the current file buffer / Exit from nano"
msgstr "关闭当前文件缓冲区 / 离开 nano"

#: src/global.c:506
msgid "Exit from nano"
msgstr "离开 nano"

#: src/global.c:510
msgid "Write the current file to disk"
msgstr "写入当前文件至磁盘"

#: src/global.c:512
msgid "Insert another file into the current one"
msgstr "插入其他文件至当前文件"

#: src/global.c:514
msgid "Search for a string or a regular expression"
msgstr "查找字符串或正则表示式"

#: src/global.c:515
msgid "Go to previous screen"
msgstr "跳至前一画面"

#: src/global.c:516
msgid "Go to next screen"
msgstr "跳至后一画面"

#: src/global.c:518
msgid "Cut the current line and store it in the cutbuffer"
msgstr "剪下当前这行并存至剪贴板"

#: src/global.c:520
msgid "Uncut from the cutbuffer into the current line"
msgstr "从剪贴板粘贴至当前这行"

#: src/global.c:522
msgid "Display the position of the cursor"
msgstr "显示游标位置"

#: src/global.c:524
msgid "Invoke the spell checker, if available"
msgstr "尝试运行拼写检查"

#: src/global.c:526
msgid "Replace a string or a regular expression"
msgstr "替换字符串或正则表示式"

#: src/global.c:527
msgid "Go to line and column number"
msgstr "跳至指定行与列位置"

#: src/global.c:529
msgid "Mark text at the cursor position"
msgstr "标记游标所在文字"

#: src/global.c:530
msgid "Repeat last search"
msgstr "重覆上次搜索"

#: src/global.c:532
msgid "Copy the current line and store it in the cutbuffer"
msgstr "拷贝当前行至剪贴板"

#: src/global.c:533
msgid "Indent the current line"
msgstr "缩进当前行"

#: src/global.c:534
msgid "Unindent the current line"
msgstr "取消缩进当前行"

#: src/global.c:535
msgid "Undo the last operation"
msgstr "撤销上次操作"

#: src/global.c:536
msgid "Redo the last undone operation"
msgstr "重做撤销的操作"

#: src/global.c:538
msgid "Go forward one character"
msgstr "向前跳一字符"

#: src/global.c:539
msgid "Go back one character"
msgstr "向后跳一字符"

#: src/global.c:541
msgid "Go forward one word"
msgstr "向前跳一个词"

#: src/global.c:542
msgid "Go back one word"
msgstr "向后跳一个词"

#: src/global.c:544
msgid "Go to previous line"
msgstr "跳至前一行"

#: src/global.c:545
msgid "Go to next line"
msgstr "跳至后一行"

#: src/global.c:546
msgid "Go to beginning of current line"
msgstr "跳至当前行首"

#: src/global.c:547
msgid "Go to end of current line"
msgstr "跳至当前行尾"

#: src/global.c:550
msgid "Go to beginning of paragraph; then of previous paragraph"
msgstr "跳至当前段落开头，如已在段落开头，则调至上一段落起始处"

#: src/global.c:552
msgid "Go just beyond end of paragraph; then of next paragraph"
msgstr "跳至当前段落结尾，如已在段落结尾，则调至下一段落结尾"

#: src/global.c:555
msgid "Go to the first line of the file"
msgstr "跳至文件第一行"

#: src/global.c:557
msgid "Go to the last line of the file"
msgstr "跳至文件最后一行"

#: src/global.c:559
msgid "Go to the matching bracket"
msgstr "移动至对应括号"

#: src/global.c:561
msgid "Scroll up one line without scrolling the cursor"
msgstr "向上卷动一行但不卷动游标"

#: src/global.c:563
msgid "Scroll down one line without scrolling the cursor"
msgstr "向下卷动一行但不卷动游标"

#: src/global.c:567
msgid "Switch to the previous file buffer"
msgstr "切换至上个文件缓冲区"

#: src/global.c:569
msgid "Switch to the next file buffer"
msgstr "切换至下个文件缓冲区"

#: src/global.c:572
msgid "Insert the next keystroke verbatim"
msgstr "插入下一按键原型"

#: src/global.c:574
msgid "Insert a tab at the cursor position"
msgstr "插入制表符于游标位置"

#: src/global.c:576
msgid "Insert a newline at the cursor position"
msgstr "插入新行于游标位置"

#: src/global.c:578
msgid "Delete the character under the cursor"
msgstr "删除游标之下的字符"

#: src/global.c:580
msgid "Delete the character to the left of the cursor"
msgstr "删除游标左侧的字符"

#: src/global.c:583
msgid "Cut from the cursor position to the end of the file"
msgstr "从游标位置剪下至文件结尾"

#: src/global.c:586
msgid "Justify the entire file"
msgstr "对齐整个文件"

#: src/global.c:590
msgid "Count the number of words, lines, and characters"
msgstr "计算字数、行数与字符数"

#: src/global.c:593
msgid "Refresh (redraw) the current screen"
msgstr "重新显示当前画面"

#: src/global.c:595
msgid "Suspend the editor (if suspend is enabled)"
msgstr "暂停编辑器 (如果支持暂停)"

#: src/global.c:598
msgid "Toggle the case sensitivity of the search"
msgstr "切换查找的区分大小写选项"

#: src/global.c:600
msgid "Reverse the direction of the search"
msgstr "反转搜索方向"

#: src/global.c:604
msgid "Toggle the use of regular expressions"
msgstr "切换使用正则表示式"

#: src/global.c:608
msgid "Recall the previous search/replace string"
msgstr "编辑前次搜索/替换字串"

#: src/global.c:610
msgid "Recall the next search/replace string"
msgstr "编辑下次搜索/替换字串"

#: src/global.c:613
msgid "Go to file browser"
msgstr "打开文件选单"

#: src/global.c:616
msgid "Toggle the use of DOS format"
msgstr "切换使用 DOS 格式"

#: src/global.c:617
msgid "Toggle the use of Mac format"
msgstr "切换使用 Mac 格式"

#: src/global.c:619
msgid "Toggle appending"
msgstr "切换追加"

#: src/global.c:620
msgid "Toggle prepending"
msgstr "切换前置插入"

#: src/global.c:623
msgid "Toggle backing up of the original file"
msgstr "切换储存既有文件的备份"

#: src/global.c:624
msgid "Execute external command"
msgstr "执行外部命令"

#: src/global.c:628
msgid "Toggle the use of a new buffer"
msgstr "切换使用新缓冲区"

#: src/global.c:631
msgid "Exit from the file browser"
msgstr "从文件选单离开"

#: src/global.c:633
msgid "Go to the first file in the list"
msgstr "跳至文件第一列"

#: src/global.c:635
msgid "Go to the last file in the list"
msgstr "跳至文件最后一列"

#: src/global.c:636
msgid "Go to directory"
msgstr "跳至目录"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:663
msgid "Close"
msgstr "关闭"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:674
msgid "WriteOut"
msgstr "写入"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:679
msgid "Justify"
msgstr "对齐"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:690
msgid "Read File"
msgstr "读档"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:707
msgid "Cut Text"
msgstr "剪下文字"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:712
msgid "UnJustify"
msgstr "还原对齐"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:717
msgid "UnCut Text"
msgstr "还原剪下"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:722 src/global.c:750
msgid "Cur Pos"
msgstr "游标位置"

#. TRANSLATORS: Try to keep this at most 10 characters.
#: src/global.c:732
msgid "To Spell"
msgstr "拼写检查"

#: src/global.c:766
msgid "Mark Text"
msgstr "标记文字"

#: src/global.c:772
msgid "Copy Text"
msgstr "复制文字"

#: src/global.c:775
msgid "Indent Text"
msgstr "缩进文字"

#: src/global.c:778
msgid "Unindent Text"
msgstr "取消缩进"

#: src/global.c:781
msgid "Undo"
msgstr "撤销"

#: src/global.c:784
msgid "Redo"
msgstr "重做"

#: src/global.c:795
msgid "Forward"
msgstr "向前"

#: src/global.c:799
msgid "Back"
msgstr "向后"

#: src/global.c:804
msgid "Next Word"
msgstr "后一个字"

#: src/global.c:807
msgid "Prev Word"
msgstr "前一个字"

#: src/global.c:811
msgid "Prev Line"
msgstr "上行"

#: src/global.c:814
msgid "Next Line"
msgstr "下行"

#: src/global.c:817
msgid "Home"
msgstr "顶端"

#: src/global.c:820
msgid "End"
msgstr "尾端"

#: src/global.c:832
msgid "Find Other Bracket"
msgstr "寻找其他括号"

#: src/global.c:835
msgid "Scroll Up"
msgstr "向上卷动"

#: src/global.c:838
msgid "Scroll Down"
msgstr "向下卷动"

#: src/global.c:843
msgid "Previous File"
msgstr "上个文件"

#: src/global.c:845
msgid "Next File"
msgstr "下个文件"

#. TRANSLATORS: This is displayed when the next keystroke will be
#. * inserted verbatim.
#: src/global.c:849 src/text.c:2967
msgid "Verbatim Input"
msgstr "原形输入"

#: src/global.c:854
msgid "Tab"
msgstr "跳格键"

#: src/global.c:857
msgid "Enter"
msgstr "输入键"

#: src/global.c:860
msgid "Delete"
msgstr "删除键"

#: src/global.c:863
msgid "Backspace"
msgstr "退格键"

#: src/global.c:880
msgid "CutTillEnd"
msgstr "删至末端"

#: src/global.c:893
msgid "Word Count"
msgstr "计算字数"

#: src/global.c:1344
msgid "Help mode"
msgstr "辅助模式"

#: src/global.c:1346
msgid "Constant cursor position display"
msgstr "持续显示游标位置"

#: src/global.c:1348
msgid "Use of one more line for editing"
msgstr "编辑时使用多一行"

#: src/global.c:1350
msgid "Smooth scrolling"
msgstr "平滑式卷动画面"

#: src/global.c:1352
msgid "Whitespace display"
msgstr "显示空格"

#: src/global.c:1354
msgid "Color syntax highlighting"
msgstr "语法色彩标示"

#: src/global.c:1356
msgid "Smart home key"
msgstr "智慧型 HOME 按键"

#: src/global.c:1358
msgid "Auto indent"
msgstr "自动缩排"

#: src/global.c:1360
msgid "Cut to end"
msgstr "剪下至行尾"

#: src/global.c:1362
msgid "Long line wrapping"
msgstr "长行转换"

#: src/global.c:1364
msgid "Conversion of typed tabs to spaces"
msgstr "已输入跳格符号至空白的转换"

#: src/global.c:1366
msgid "Backup files"
msgstr "备份文件"

#: src/global.c:1368
msgid "Multiple file buffers"
msgstr "多重文件缓冲区"

#: src/global.c:1370
msgid "Mouse support"
msgstr "鼠标支持"

#: src/global.c:1372
msgid "No conversion from DOS/Mac format"
msgstr "不从 DOS/Mac 格式转换"

#: src/global.c:1374
msgid "Suspension"
msgstr "暂停"

#: src/help.c:236
msgid ""
"Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.  "
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字串或字符，然后按下输入键 (Enter)。如果存在着 符合您所"
"输入的文字，画面就会更新到最合乎搜索字串的位置。\n"
"\n"
" 前次搜索的字串将会显示在 搜索: 提示符号后面的括号中。不输入任何文字 而直接按"
"下输入键则会履行前次的搜索。"

#: src/help.c:245
msgid ""
"If you have selected text with the mark and then search to replace, only "
"matches in the selected text will be replaced.\n"
"\n"
" The following function keys are available in Search mode:\n"
"\n"
msgstr ""
"如果您已经用标记选择了一段文字 并进行搜索替换，就只有在选择文字中符合者将会被"
"替换。\n"
"\n"
" 以下的功能键可用于搜索模式:\n"
"\n"

#: src/help.c:251
msgid ""
"Go To Line Help Text\n"
"\n"
" Enter the line number that you wish to go to and hit Enter.  If there are "
"fewer lines of text than the number you entered, you will be brought to the "
"last line of the file.\n"
"\n"
" The following function keys are available in Go To Line mode:\n"
"\n"
msgstr ""
"跳行辅助说明\n"
"\n"
" 首先输入您想去的行数编号并按下输入键 (Enter)。如果文章中的行数比您所输 入要"
"少，您将会被带至文件的最后一行。\n"
"\n"
" 以下的功能键可用于跳行模式: \n"
"\n"

#: src/help.c:260
msgid ""
"Insert File Help Text\n"
"\n"
" Type in the name of a file to be inserted into the current file buffer at "
"the current cursor location.\n"
"\n"
" If you have compiled nano with multiple file buffer support, and enable "
"multiple file buffers with the -F or --multibuffer command line flags, the "
"Meta-F toggle, or a nanorc file, inserting a file will cause it to be loaded "
"into a separate buffer (use Meta-< and > to switch between file buffers).  "
msgstr ""
"插入文件辅助说明\n"
"\n"
" 先把文件的名称键入，它将会插入在当前缓冲区的游标所在之处。\n"
"\n"
" 如果您所编译的 nano 支持多重文件缓冲区，并且将此功能以命令列旗标 -F 或 --"
"multibuffer、Meta-F 开关，或者 nanorc 文件来启动的话，所插入的文件 将会被载入"
"另外的缓冲区中 (利用 Meta-< 和 > 在文件缓冲区间切换)。 "

#: src/help.c:269
msgid ""
"If you need another blank buffer, do not enter any filename, or type in a "
"nonexistent filename at the prompt and press Enter.\n"
"\n"
" The following function keys are available in Insert File mode:\n"
"\n"
msgstr ""
"如果您需要另一个空的缓冲区，那就不要输入任何档名，或是在提示符号后键 入一个不"
"存在的档名，然后按下输入键。\n"
"\n"
" 以下的功能键可用于插入文件模式:\n"
"\n"

#: src/help.c:275
msgid ""
"Write File Help Text\n"
"\n"
" Type the name that you wish to save the current file as and press Enter to "
"save the file.\n"
"\n"
" If you have selected text with the mark, you will be prompted to save only "
"the selected portion to a separate file.  To reduce the chance of "
"overwriting the current file with just a portion of it, the current filename "
"is not the default in this mode.\n"
"\n"
" The following function keys are available in Write File mode:\n"
"\n"
msgstr ""
"写入文件辅助说明\n"
"\n"
" 先键入您想要以此来储存当前文件的名称，并按下输入键来储存文件。\n"
"\n"
" 如果已经用标记选择了文字，那么您将会被提示，只储存标记部份到另外的档 案。为"
"了降低当前文件只被其中部份覆写的机会，在此模式下，当前的档名不会 成为预设"
"值。\n"
"\n"
" 以下的功能键可用于写入文件模式: \n"
"\n"

#: src/help.c:289
msgid ""
"File Browser Help Text\n"
"\n"
" The file browser is used to visually browse the directory structure to "
"select a file for reading or writing.  You may use the arrow keys or Page Up/"
"Down to browse through the files, and S or Enter to choose the selected file "
"or enter the selected directory.  To move up one level, select the directory "
"called \"..\" at the top of the file list.\n"
"\n"
" The following function keys are available in the file browser:\n"
"\n"
msgstr ""
"文件选单辅助说明\n"
"\n"
" 文件选单是用来视觉化浏览目录结构，以选取要读出或写入的文件。您可以 使用上下"
"左右键或上页/下页来浏览，并用 S 或输入键来选取所要的文件或者 进入所选的目录。"
"要跳到上层时，选择在文件列表顶端名为 \"..\" 的目录。\n"
"\n"
" 以下的功能键可用于文件选单: \n"
"\n"

#: src/help.c:302
msgid ""
"Browser Search Command Help Text\n"
"\n"
" Enter the words or characters you would like to search for, and then press "
"Enter.  If there is a match for the text you entered, the screen will be "
"updated to the location of the nearest match for the search string.\n"
"\n"
" The previous search string will be shown in brackets after the search "
"prompt.  Hitting Enter without entering any text will perform the previous "
"search.\n"
"\n"
msgstr ""
"搜索命令辅助说明\n"
"\n"
" 首先输入您想要搜索的字串或字符，然后按下输入键 (Enter)。如果存在著 符合您所"
"输入的文字，画面就会更新到最合乎搜索字串的位置。\n"
"\n"
" 前次搜索的字串将会显示在 搜索: 提示符号后面的括号中。不输入任何文字 而直接按"
"下输入键则会履行前次的搜索。\n"
"\n"

#: src/help.c:311
msgid ""
" The following function keys are available in Browser Search mode:\n"
"\n"
msgstr ""
"在搜索模式可使用如下的功能键:\n"
"\n"

#: src/help.c:315
msgid ""
"Browser Go To Directory Help Text\n"
"\n"
" Enter the name of the directory you would like to browse to.\n"
"\n"
" If tab completion has not been disabled, you can use the Tab key to "
"(attempt to) automatically complete the directory name.\n"
"\n"
" The following function keys are available in Browser Go To Directory mode:\n"
"\n"
msgstr ""
"跳至目录辅助说明\n"
"\n"
" 先输入您想要浏览的目录名称。\n"
"\n"
" 如果跳格补正的功能没有被关闭，您可以利用跳格键 (TAB) 去 (尝试) 自动 补正目录"
"名称。\n"
"\n"
" 以下的功能键可用于跳至目录模式: \n"
"\n"

#: src/help.c:328
msgid ""
"Spell Check Help Text\n"
"\n"
" The spell checker checks the spelling of all text in the current file.  "
"When an unknown word is encountered, it is highlighted and a replacement can "
"be edited.  It will then prompt to replace every instance of the given "
"misspelled word in the current file, or, if you have selected text with the "
"mark, in the selected text.\n"
"\n"
" The following function keys are available in Spell Check mode:\n"
"\n"
msgstr ""
"拼写检查辅助说明\n"
"\n"
" 拼写检查程式会检查当前文件中所有文字的拼法。当遇到一个未知的字，它会 被标记"
"起来，并让您编辑替代文字。对于当前文件中每一个拼错的字，都会显示 替换的提示；"
"或者，如果已经用标记选择了文字的话，那就只作用于选取的文字 之中。\n"
"\n"
" 以下的功能键可用于拼写检查模式: \n"
"\n"

#: src/help.c:343
msgid ""
"Execute Command Help Text\n"
"\n"
" This mode allows you to insert the output of a command run by the shell "
"into the current buffer (or a new buffer in multiple file buffer mode).  If "
"you need another blank buffer, do not enter any command.\n"
"\n"
" The following function keys are available in Execute Command mode:\n"
"\n"
msgstr ""
"执行命令辅助说明\n"
"\n"
" 本选单允许您将 shell 执行的命令输出结果，插入当前的缓冲区 (或是多重缓冲 区模"
"式下的新缓冲区)。如果您需要另一个空白缓冲区，就不要输入任何命令。\n"
"\n"
" 以下的功能键可用于执行命令模式:\n"
"\n"

#: src/help.c:356
msgid ""
"Main nano help text\n"
"\n"
" The nano editor is designed to emulate the functionality and ease-of-use of "
"the UW Pico text editor.  There are four main sections of the editor.  The "
"top line shows the program version, the current filename being edited, and "
"whether or not the file has been modified.  Next is the main editor window "
"showing the file being edited.  The status line is the third line from the "
"bottom and shows important messages.  "
msgstr ""
"nano 辅助说明\n"
"\n"
" nano 编辑器是设计来在功能性及易用性方面，模仿华盛顿大学的 Pico 文字 编辑器。"
"它含有四个主要部份:顶行显示程式版本、当前被编辑的文件名称， 以及是否这文件已"
"经更动过。接著是主要编辑区，显示正在编辑的文件。状态 行位于倒数第三行，用来显"
"示重要的讯息。底部的两行则显示编辑器中最常用 到的快捷键。\n"
"\n"
" "

#: src/help.c:366
msgid ""
"The bottom two lines show the most commonly used shortcuts in the editor.\n"
"\n"
" The notation for shortcuts is as follows: Control-key sequences are notated "
"with a caret (^) symbol and can be entered either by using the Control "
"(Ctrl) key or pressing the Escape (Esc) key twice.  Escape-key sequences are "
"notated with the Meta (M-) symbol and can be entered using either the Esc, "
"Alt, or Meta key depending on your keyboard setup.  "
msgstr ""
"快捷键的记号定义如下：控制键组 (Control-key) 序列是以一个 \"帽子\" (caret, "
"^) 符号来表示，它可以藉由控制键 (Ctrl) 或是按两次脱离键 (Esc) 来输入。脱离键"
"组 (Escape-key) 序列是以 \"中介\" (Meta, M) 符号表示，它 可以依照您的键盘设"
"定，利用 Esc，Alt 或 Meta 来输入。"

#: src/help.c:375
msgid ""
"Also, pressing Esc twice and then typing a three-digit decimal number from "
"000 to 255 will enter the character with the corresponding value.  The "
"following keystrokes are available in the main editor window.  Alternative "
"keys are shown in parentheses:\n"
"\n"
msgstr ""
"另外，按 Esc 两次 之后再键入从 000 到 255 之间的三位数字，则会输入该 ASCII 码"
"对应的字 元。下列按键组合可用于主要编辑区，替代按键则显示于括弧内:\n"
"\n"

#: src/help.c:407 src/help.c:483
msgid "enable/disable"
msgstr "开启/关闭"

#: src/nano.c:590
msgid "Key invalid in view mode"
msgstr "观看模式中此按键无效"

#: src/nano.c:686
#, c-format
msgid ""
"\n"
"Buffer written to %s\n"
msgstr ""
"\n"
"缓冲区已写入 %s\n"

#: src/nano.c:688
#, c-format
msgid ""
"\n"
"Buffer not written to %s: %s\n"
msgstr ""
"\n"
"缓冲区未写入至 %s: %s\n"

#: src/nano.c:691
#, c-format
msgid ""
"\n"
"Buffer not written: %s\n"
msgstr ""
"\n"
"缓冲区未写入: %s\n"

#: src/nano.c:703
msgid "Window size is too small for nano...\n"
msgstr "视窗尺寸对 nano 来说太小了...\n"

#: src/nano.c:796
#, c-format
msgid ""
"Usage: nano [OPTIONS] [[+LINE,COLUMN] FILE]...\n"
"\n"
msgstr ""
"用法: nano [选项] [[+行,列] 文件名称]...\n"
"\n"

#: src/nano.c:799
#, c-format
msgid "Option\t\tGNU long option\t\tMeaning\n"
msgstr "选项\t\tGNU 长选项\t\t意义\n"

#: src/nano.c:801
#, c-format
msgid "Option\t\tMeaning\n"
msgstr "选项\t\t意义\n"

#: src/nano.c:804
msgid "Show this message"
msgstr "显示此讯息"

#: src/nano.c:805
msgid "+LINE,COLUMN"
msgstr "+行,列"

#: src/nano.c:806
msgid "Start at line LINE, column COLUMN"
msgstr "从所指列数与行数开始"

#: src/nano.c:808
msgid "Enable smart home key"
msgstr "开启智慧型 HOME 按键功能"

#: src/nano.c:809
msgid "Save backups of existing files"
msgstr "储存既有文件的备份"

#: src/nano.c:810
msgid "-C <dir>"
msgstr "-C <目录>"

#: src/nano.c:810
msgid "--backupdir=<dir>"
msgstr "--backupdir=<目录>"

#: src/nano.c:811
msgid "Directory for saving unique backup files"
msgstr "用以储存独一备份文件的目录"

#: src/nano.c:814
msgid "Use bold instead of reverse video text"
msgstr "用粗体替代颜色反转"

#: src/nano.c:817
msgid "Convert typed tabs to spaces"
msgstr "将已输入的跳格符号转换为空白"

#: src/nano.c:820
msgid "Enable multiple file buffers"
msgstr "开启多重文件缓冲区功能"

#: src/nano.c:825
msgid "Log & read search/replace string history"
msgstr "记录与读取 搜索/替换 的历史字串"

#: src/nano.c:828
msgid "Don't look at nanorc files"
msgstr "不要参考 nanorc 文件"

#: src/nano.c:831
msgid "Fix numeric keypad key confusion problem"
msgstr "修正数字键区按键混淆问题"

#: src/nano.c:833
msgid "Don't add newlines to the ends of files"
msgstr "不要将换行加到文件末端"

#: src/nano.c:836
msgid "Don't convert files from DOS/Mac format"
msgstr "不要从 DOS/Mac 格式转换"

#: src/nano.c:838
msgid "Use one more line for editing"
msgstr "编辑时多使用一行"

#: src/nano.c:840
msgid "-Q <str>"
msgstr "-Q <字串>"

#: src/nano.c:840
msgid "--quotestr=<str>"
msgstr "--quotestr=<字串>"

#: src/nano.c:841
msgid "Quoting string"
msgstr "引用代表字串"

#: src/nano.c:843
msgid "Restricted mode"
msgstr "限制模式"

#: src/nano.c:846
msgid "Scroll by line instead of half-screen"
msgstr "按行滚动而不是半屏"

#: src/nano.c:848
msgid "-T <#cols>"
msgstr "-T <#列数>"

#: src/nano.c:848
msgid "--tabsize=<#cols>"
msgstr "--tabsize=<#列数>"

#: src/nano.c:849
msgid "Set width of a tab to #cols columns"
msgstr "设定跳格宽度为 #列数"

#: src/nano.c:851
msgid "Do quick statusbar blanking"
msgstr "状态行快速闪动"

#: src/nano.c:854
msgid "Print version information and exit"
msgstr "显示版本资讯并离开"

#: src/nano.c:857
msgid "Detect word boundaries more accurately"
msgstr "更正确地侦测单字边界"

#: src/nano.c:860
msgid "-Y <str>"
msgstr "-Y <字串>"

#: src/nano.c:860
msgid "--syntax=<str>"
msgstr "--syntax=<字串>"

#: src/nano.c:861
msgid "Syntax definition to use for coloring"
msgstr "用于加亮的语法定义"

#: src/nano.c:863
msgid "Constantly show cursor position"
msgstr "持续显示游标位置"

#: src/nano.c:865
msgid "Fix Backspace/Delete confusion problem"
msgstr "修正 退格键/删除键 混淆问题"

#: src/nano.c:868
msgid "Automatically indent new lines"
msgstr "自动缩排新行"

#: src/nano.c:869
msgid "Cut from cursor to end of line"
msgstr "从游标剪下至行尾"

#: src/nano.c:872
msgid "Don't follow symbolic links, overwrite"
msgstr "不要依照符号连结，而是覆写"

#: src/nano.c:874
msgid "Enable the use of the mouse"
msgstr "开启鼠标功能"

#: src/nano.c:877
msgid "-o <dir>"
msgstr "-o <目录>"

#: src/nano.c:877
msgid "--operatingdir=<dir>"
msgstr "--operatingdir=<目录>"

#: src/nano.c:878
msgid "Set operating directory"
msgstr "设定操作目录"

#: src/nano.c:881
msgid "Preserve XON (^Q) and XOFF (^S) keys"
msgstr "保留 XON (^Q) 和 XOFF (^S) 按键"

#: src/nano.c:883
msgid "Silently ignore startup issues like rc file errors"
msgstr "沉默忽略启动问题, 比如 rc 文件错误"

#: src/nano.c:885
msgid "-r <#cols>"
msgstr "-r <#列数>"

#: src/nano.c:885
msgid "--fill=<#cols>"
msgstr "--fill=<#列数>"

#: src/nano.c:886
msgid "Set wrapping point at column #cols"
msgstr "设定折行宽度为 #列数"

#: src/nano.c:889
msgid "-s <prog>"
msgstr "-s <程式>"

#: src/nano.c:889
msgid "--speller=<prog>"
msgstr "--speller=<程式>"

#: src/nano.c:890
msgid "Enable alternate speller"
msgstr "启用替代的拼写检查程式"

#: src/nano.c:893
msgid "Auto save on exit, don't prompt"
msgstr "离开时自动储存，不要提示"

#: src/nano.c:894
msgid "View mode (read-only)"
msgstr "观看 (唯读) 模式"

#: src/nano.c:896
msgid "Don't wrap long lines"
msgstr "不要自动换行"

#: src/nano.c:898
msgid "Don't show the two help lines"
msgstr "不要显示辅助区"

#: src/nano.c:899
msgid "Enable suspension"
msgstr "开启暂停功能"

#: src/nano.c:903
msgid "(ignored, for Pico compatibility)"
msgstr "(忽略，为了与 Pico 相容)"

#: src/nano.c:913
#, c-format
msgid " GNU nano version %s (compiled %s, %s)\n"
msgstr " GNU nano 版本 %s (编译于 %s, %s)\n"

#: src/nano.c:918
#, c-format
msgid " Email: nano@nano-editor.org\tWeb: http://www.nano-editor.org/"
msgstr " 电子邮件: nano@nano-editor.org\t\t网页: http://www.nano-editor.org/"

#: src/nano.c:919
#, c-format
msgid ""
"\n"
" Compiled options:"
msgstr ""
"\n"
" 编译选项:"

#: src/nano.c:997
msgid "Sorry, support for this function has been disabled"
msgstr "抱歉，已经关闭此功能的支持"

#: src/nano.c:1019
msgid "Save modified buffer (ANSWERING \"No\" WILL DESTROY CHANGES) ? "
msgstr "储存更动过的缓冲区吗 (回答 \"No\" 会撤销修改)？"

#: src/nano.c:1061
msgid "Couldn't reopen stdin from keyboard, sorry\n"
msgstr "无法从键盘设备重新打开 (reopen) 标准输入, 抱歉\n"

#: src/nano.c:1084
#, c-format
msgid "Reading from stdin, ^C to abort\n"
msgstr "正在从标准输入读入, 可用 ^C 打断\n"

#: src/nano.c:1152
msgid "Received SIGHUP or SIGTERM\n"
msgstr "接收到 SIGHUP 或 SIGTERM\n"

#: src/nano.c:1170
#, c-format
msgid "Use \"fg\" to return to nano.\n"
msgstr "利用 \"fg\" 来回到 nano\n"

#: src/nano.c:1347
msgid "enabled"
msgstr "开启"

#: src/nano.c:1348
msgid "disabled"
msgstr "关闭"

#: src/nano.c:1509 src/winio.c:1256
msgid "Unknown Command"
msgstr "未知命令"

#: src/nano.c:1635
msgid "XON ignored, mumble mumble"
msgstr "忽略 XON，嗯嗯。"

#: src/nano.c:1640
msgid "XOFF ignored, mumble mumble"
msgstr "忽略 XOFF，嗯嗯。"

#: src/nano.c:2135 src/rcfile.c:1032
#, c-format
msgid "Requested tab size \"%s\" is invalid"
msgstr "所要求的跳格宽度 %s 无效"

#: src/nano.c:2194 src/rcfile.c:957
#, c-format
msgid "Requested fill size \"%s\" is invalid"
msgstr "所要求的填满行数 \"%s\" 无效"

#. TRANSLATORS: For the next three strings, if possible, specify
#. * the single-byte shortcuts for both your language and English.
#. * For example, in French: "OoYy" for "Oui".
#: src/prompt.c:1261
msgid "Yy"
msgstr "Yy"

#: src/prompt.c:1262
msgid "Nn"
msgstr "Nn"

#: src/prompt.c:1263
msgid "Aa"
msgstr "Aa"

#: src/prompt.c:1277
msgid "Yes"
msgstr "是"

#: src/prompt.c:1282
msgid "All"
msgstr "全部"

#: src/prompt.c:1287
msgid "No"
msgstr "否"

#: src/rcfile.c:127
#, c-format
msgid "Error in %s on line %lu: "
msgstr "在 %s (位于第 %lu 行) 中发生错误: "

#: src/rcfile.c:182
#, c-format
msgid "Argument '%s' has an unterminated \""
msgstr "参数 %s 有未封闭的 \""

#: src/rcfile.c:209 src/rcfile.c:261 src/rcfile.c:645 src/rcfile.c:702
#: src/rcfile.c:755
msgid "Regex strings must begin and end with a \" character"
msgstr "正则表示式字串必须以 \" 字符开始及结束"

#: src/rcfile.c:235 src/search.c:62
#, c-format
msgid "Bad regex \"%s\": %s"
msgstr "非法的正则表示式 \"%s\": %s"

#: src/rcfile.c:255
msgid "Missing syntax name"
msgstr "缺少语法名称"

#: src/rcfile.c:313
msgid "The \"none\" syntax is reserved"
msgstr "\"none\" 语法已被保留"

#: src/rcfile.c:320
msgid "The \"default\" syntax must take no extensions"
msgstr "\"default\" 语法必须不含任何副档名"

#: src/rcfile.c:383
msgid "Missing key name"
msgstr "缺少键名称"

#: src/rcfile.c:395
msgid "keybindings must begin with \"^\", \"M\", or \"F\""
msgstr "键绑定必须以 \"^\", \"M\" 或 \"F\" 开始"

#: src/rcfile.c:404
msgid "Must specify function to bind key to"
msgstr "必须指定键绑定到的函数"

#: src/rcfile.c:415
msgid "Must specify menu to bind key to (or \"all\")"
msgstr "必须指定键绑定到的菜单 (或 \"all\")"

#: src/rcfile.c:422
#, c-format
msgid "Could not map name \"%s\" to a function"
msgstr "无法映射名字 \"%s\" 到一个函数"

#: src/rcfile.c:429
#, c-format
msgid "Could not map name \"%s\" to a menu"
msgstr "无法映射名字 \"%s\" 到一个菜单"

#: src/rcfile.c:451
#, c-format
msgid "Sorry, keystr \"%s\" is an illegal binding"
msgstr "抱歉，键 \"%s\" 属非法绑定"

#: src/rcfile.c:559
#, c-format
msgid ""
"Color \"%s\" not understood.\n"
"Valid colors are \"green\", \"red\", \"blue\",\n"
"\"white\", \"yellow\", \"cyan\", \"magenta\" and\n"
"\"black\", with the optional prefix \"bright\"\n"
"for foreground colors."
msgstr ""
"颜色 %s 无法辨识。\n"
"有效的颜色是 \"green\"(绿)、\"red\"(红)、\"blue\"(蓝)、\n"
"\"white\"(白)、\"yellow\"(黄)、\"cyan\"(青)、\"magenta\"(瑰) 和 \n"
"\"black\"(黑)，选择性的前置字 \"bright\"(明亮) \n"
"可用于前景色。"

#: src/rcfile.c:581
msgid "Cannot add a color command without a syntax command"
msgstr "无法直接增加颜色而没有语法行"

#: src/rcfile.c:586
msgid "Missing color name"
msgstr "缺少颜色名称"

#: src/rcfile.c:606
#, c-format
msgid "Background color \"%s\" cannot be bright"
msgstr "背景色 %s 不可为明亮"

#: src/rcfile.c:624 src/rcfile.c:743
msgid "Missing regex string"
msgstr "缺少正则表示式字串"

#: src/rcfile.c:696
msgid "\"start=\" requires a corresponding \"end=\""
msgstr "\"start=\" 要求对应的 \"end=\""

#: src/rcfile.c:738
msgid "Cannot add a header regex without a syntax command"
msgstr "无法直接增加头部正则表达式而没有语法行"

#: src/rcfile.c:808
#, c-format
msgid "Fatal error: no keys mapped for function \"%s\""
msgstr "严重错误; 没有键映射到函数 \"%s\""

#: src/rcfile.c:810
msgid ""
"Exiting.  Please use nano with the -I option if needed to adjust your nanorc "
"settings\n"
msgstr "正在退出。如果你想调整你的 nanorc 设置，请使用 nano 的 -I 选项。\n"

#: src/rcfile.c:860 src/rcfile.c:869 src/rcfile.c:879
#, c-format
msgid "Command \"%s\" not allowed in included file"
msgstr "命令 \"%s\" 被禁止在包含文件中使用"

#: src/rcfile.c:885 src/rcfile.c:1057
#, c-format
msgid "Syntax \"%s\" has no color commands"
msgstr "语法 \"%s\" 没有 color 命令"

#: src/rcfile.c:898
#, c-format
msgid "Command \"%s\" not understood"
msgstr "无法辨识 \"%s\" 命令"

#: src/rcfile.c:904
msgid "Missing flag"
msgstr "缺少旗标"

#: src/rcfile.c:926
#, c-format
msgid "Option \"%s\" requires an argument"
msgstr "选项 %s 要求一个参数"

#: src/rcfile.c:944
msgid "Option is not a valid multibyte string"
msgstr "选项并非正确的多位元字串"

#: src/rcfile.c:970 src/rcfile.c:998 src/rcfile.c:1007
msgid "Non-blank characters required"
msgstr "需要非空格字符"

#: src/rcfile.c:980
msgid "Two single-column characters required"
msgstr "需要两个单行字符"

#: src/rcfile.c:1046
#, c-format
msgid "Cannot unset flag \"%s\""
msgstr "无法解除旗标 %s 设定"

#: src/rcfile.c:1052
#, c-format
msgid "Unknown flag \"%s\""
msgstr "旗标 %s 无法辨识"

#: src/rcfile.c:1111
msgid "I can't find my home directory!  Wah!"
msgstr "我找不到我的家目录！哇！"

#: src/search.c:96
#, c-format
msgid "\"%.*s%s\" not found"
msgstr "找不到 \"%.*s%s\""

#: src/search.c:205
msgid " (to replace) in selection"
msgstr " 在标记中(替换)"

#: src/search.c:207
msgid " (to replace)"
msgstr " (替换)"

#: src/search.c:784
msgid "Replace this instance?"
msgstr "替换这个？"

#: src/search.c:962
msgid "Replace with"
msgstr "以此替换"

#: src/search.c:1004
#, c-format
msgid "Replaced %lu occurrence"
msgid_plural "Replaced %lu occurrences"
msgstr[0] "已替换 %lu 处"

#: src/search.c:1034
msgid "Enter line number, column number"
msgstr "输入列号，行号"

#: src/search.c:1061
msgid "Invalid line or column number"
msgstr "无效的列号或行号"

#: src/search.c:1214
msgid "Not a bracket"
msgstr "并非一个括号"

#: src/search.c:1281
msgid "No matching bracket"
msgstr "无对应括号"

#: src/text.c:54
msgid "Mark Set"
msgstr "标记设定"

#: src/text.c:58
msgid "Mark Unset"
msgstr "标记解除"

#: src/text.c:432
msgid "Nothing in undo buffer!"
msgstr "没有可撤销的操作！"

#: src/text.c:444 src/text.c:566
#, c-format
msgid "Internal error: can't match line %d.  Please save your work"
msgstr "内部错误: 无法匹配行 %d。请保存你的工作"

#: src/text.c:455 src/text.c:576
msgid "text add"
msgstr "文字增加"

#: src/text.c:464 src/text.c:586
msgid "text delete"
msgstr "文本删除"

#: src/text.c:477 src/text.c:595
msgid "line split"
msgstr "行分割"

#: src/text.c:488 src/text.c:606
msgid "line join"
msgstr "行合并"

#: src/text.c:499 src/text.c:621
msgid "text cut"
msgstr "文字剪切"

#: src/text.c:503 src/text.c:625
msgid "text uncut"
msgstr "取消剪切"

#: src/text.c:507 src/text.c:635
msgid "text insert"
msgstr "文本插入"

#: src/text.c:525 src/text.c:629
msgid "text replace"
msgstr "文本替换"

#: src/text.c:531 src/text.c:641
msgid "Internal error: unknown type.  Please save your work"
msgstr "内部错误: 未知类型。请保存你的工作"

#: src/text.c:536
#, c-format
msgid "Undid action (%s)"
msgstr "已撤销操作 (%s)"

#: src/text.c:551
msgid "Nothing to re-do!"
msgstr "没有可重做的操作！"

#: src/text.c:555
msgid "Internal error: Redo setup failed.  Please save your work"
msgstr "内部错误: 重做设置失败。请保存你的工作"

#: src/text.c:646
#, c-format
msgid "Redid action (%s)"
msgstr "已重做操作 (%s)"

#: src/text.c:735
msgid "Could not pipe"
msgstr "管线功能无效"

#: src/text.c:762 src/text.c:2568 src/text.c:2715
msgid "Could not fork"
msgstr "执行功能无效"

#: src/text.c:891
msgid "Internal error: can't setup uncut.  Please save your work."
msgstr "内部错误: 无法配置取消剪切。请保存你的工作"

#: src/text.c:898
msgid "Internal error: unknown type.  Please save your work."
msgstr "内部错误: 未知类型。请保存你的工作。"

#: src/text.c:1802
#, c-format
msgid "Bad quote string %s: %s"
msgstr "不良引用字串 %s: %s"

#: src/text.c:2199
msgid "Can now UnJustify!"
msgstr "现在可以还原对齐！"

#: src/text.c:2394
msgid "Edit a replacement"
msgstr "编辑替代文字"

#: src/text.c:2480
msgid "Could not create pipe"
msgstr "无法建立管线功能"

#: src/text.c:2482
msgid "Creating misspelled word list, please wait..."
msgstr "正在建立错字列表，请稍待..."

#: src/text.c:2574
msgid "Could not get size of pipe buffer"
msgstr "无法得知管线缓冲区大小"

#: src/text.c:2625
msgid "Error invoking \"spell\""
msgstr "运行 \"spell\" 错误"

#: src/text.c:2628
msgid "Error invoking \"sort -f\""
msgstr "运行 \"sort -f\" 错误"

#: src/text.c:2631
msgid "Error invoking \"uniq\""
msgstr "运行 \"uniq\" 错误"

#: src/text.c:2742
#, c-format
msgid "Error invoking \"%s\""
msgstr "运行 \"%s\" 错误"

#: src/text.c:2882
#, c-format
msgid "Spell checking failed: %s"
msgstr "拼写检查失败: %s"

#: src/text.c:2884
#, c-format
msgid "Spell checking failed: %s: %s"
msgstr "拼写检查失败: %s: %s"

#: src/text.c:2887
msgid "Finished checking spelling"
msgstr "拼写检查结束"

#: src/text.c:2952
#, c-format
msgid "%sWords: %lu  Lines: %ld  Chars: %lu"
msgstr "%s字数: %lu  行数: %ld  字符数: %lu"

#: src/text.c:2953
msgid "In Selection:  "
msgstr "于选择部份: "

#: src/utils.c:405 src/utils.c:417
msgid "nano is out of memory!"
msgstr "nano 已耗尽内存！"

#. TRANSLATORS: This is displayed during the input of a
#. * six-digit hexadecimal Unicode character code.
#: src/winio.c:1557
msgid "Unicode Input"
msgstr "Unicode 输入"

#: src/winio.c:2149 src/winio.c:2153
msgid "Modified"
msgstr "已更动"

#: src/winio.c:2150
msgid "View"
msgstr "观看"

#: src/winio.c:2164
msgid "DIR:"
msgstr "目录:"

#: src/winio.c:2171
msgid "File:"
msgstr "文件:"

#: src/winio.c:3234
#, c-format
msgid "line %ld/%ld (%d%%), col %lu/%lu (%d%%), char %lu/%lu (%d%%)"
msgstr "行 %ld/%ld (%d%%), 列 %lu/%lu (%d%%), 字符 %lu/%lu (%d%%)"

#: src/winio.c:3366
msgid "The nano text editor"
msgstr "nano 文字编辑器"

#: src/winio.c:3367
msgid "version"
msgstr "版本"

#: src/winio.c:3368
msgid "Brought to you by:"
msgstr "来自于:"

#: src/winio.c:3369
msgid "Special thanks to:"
msgstr "特别感谢:"

#: src/winio.c:3370
msgid "The Free Software Foundation"
msgstr "自由软体基金会"

#: src/winio.c:3371
msgid "For ncurses:"
msgstr "ncurses 部份:"

#: src/winio.c:3372
msgid "and anyone else we forgot..."
msgstr "以及其他我们不记得的人..."

#: src/winio.c:3373
msgid "Thank you for using nano!"
msgstr "谢谢您使用 nano！"