Since the previous commit, nano exits from curses mode soon after
this message is printed, so that the user does not have any time
to read it or even see it.
When invoking the "internal" speller, leave curses mode while the three
programs in the pipe array are executing, to prevent 'hunspell' from
writing a long error message to the end of the status bar, making the
screen scroll, and thus messing it up. Now the error message gets
printed to the screen that nano was started up from, and will thus be
visible when the user exits from nano. (At least: it will be so on a
terminal emulator -- on a VT, nothing will be seen.)
This fixes https://savannah.gnu.org/bugs/?57728.
Bug existed since version 4.6, commit 4d77e0ad.
When at startup the user presses Cancel at the "open anyway?" prompt,
cancel the whole startup: quit. But when the user answers No, just
skip the file and continue starting up.
Don't bother looping until the 1024 bytes are read. Writing the lock
file takes just one shot too, and that is more important to get right.
Also, correct the type for the result of read(), so that -1 doesn't
get turned into a positive number, which would mean that any error
would get ignored.
It would be better if nano wrote the full filename into the lock file,
because that would be clearer when Vim displays its warning, but...
this is faster and will do for now.
(Nano should simply also store the full filename in the openfile struct,
so that get_full_path() needs to be called just once for each file.)
This addresses https://savannah.gnu.org/bugs/?57713.
The call of ferror() as parameter of a %s specifier was a mistake --
it returns a number, not a string. Avoid the problem by combining
two error checks.
The man page of fwrite() does not say anything about errno, but I guess
that the function calls write() and that the possible error numbers of
that function apply.
In theory it is now possible that fclose() fails and returns an error
that then masks an earlier error of fwrite(). But I can't be bothered:
lock files are not essential, and any errors that might occur are most
likely overlooked anyway because they are not displayed in red.
This fixes https://savannah.gnu.org/bugs/?57724.
Bug existed since lock files were introduced, in version 2.3.2,
commit bf88d27a.
All the things that we need are located within the first 68 bytes of
the .swp file. We do write byte 1007 when the file is modified, but
we never reference it. We always wrote just 1024 bytes to the .swp
file, so it makes no sense to read in any more than that.
(Vim writes 4096 bytes to a .swp at first, before adding undo stuff
four seconds later. But the 1024 bytes appear to be enough for Vim
to recognize it as a lock file.)
When asking "continue?", I always thought that answering No would mean
that nano would not continue, that it would stop, that it would abort.
But No only means that it will not open the relevant file but continues
anyway to start up. Asking "open anyway?" is more easily understood in
that way.
Unreadable or corrupt lock files are not a user error nor user intent,
so they should not keep the user from editing the corresponding file.
Also, combine some error conditions to compact the code.
This addresses https://savannah.gnu.org/bugs/?57700.
When in view mode, the file cannot be edited, so there is no need to
warn anyone (through a lock file) that the file might soon change.
This fixes https://savannah.gnu.org/bugs/?57694.
At that point, 'u->cutbuffer' will always be NULL, either from the
original creation of the INSERT undo item, or by having been freed
and set to NULL by do_redo().
The 'prev' and 'next' links get assigned to immediately after the
call of copy_node(). And anyway, it does not make sense to link
a copied node to the predecessor and successor of its original.
Also slightly regroup some lines.
Also, the disabling of the keyboard interrupt (SIGINT) must happen
after that initialization call, otherwise ^C will still do nothing
after returning from suspension (when nano is built against Slang).
This fixes https://savannah.gnu.org/bugs/?57656.
Bug existed since version 2.2.0, commit daaf468c.
When the guiding stripe (when softwrapping) will be shown in
a later chunk, it shouldn't be shown in the current chunk.
This fixes https://savannah.gnu.org/bugs/?57654.
Bug existed since --guidestripe was introduced, in version 4.0.
When having prepared a line for displaying on the screen, nano already
determind whether the line extends beyond the right edge or not. There
is no need to calculate again the full width of the current line later.
Just let display_string() make a note whether the piece of text that
it converted to displayable form still has more text coming after it,
and use this note when it's time to show the ">" continuation sign.
Using a static variable is ugly, but passing it along as a parameter
would be even uglier, because for all other calls of display_string()
the parameter would be just a useless burden.
(The diff is stupid. It should just remove 440 contiguous lines, and
add back 440 contiguous lines further down. Instead it tries to find
similarities between what is moved and what remains, and makes a mess.
You have to use --patience or --minimal to get the better diff.)
The plain keys that are valid in the help viewer are a perfect subset of
those that are valid in the file browser, so just use the same function
to do the interpretation for both. It is not a problem that it returns
function pointers for some keystrokes that have no meaning in the help
viewer, because both NULL and an unhandled function pointer result in
the "Unbound key" message.
Allow the user to paste in the character for Yes, No, or All. If the
paste contains more than one character, ignore all but the first.
This fully fixes https://savannah.gnu.org/bugs/?57623.
Reported-by: Brand Huntsman <alpha@qzx.com>
The tiny version is oblivious of bracketed pastes, as it serves no
purpose: in the tiny version there is no auto-indent nor undo nor
tabs-to-spaces conversion.
Any modifier keys that are needed to start the execution of a macro
(or of a string bind) should not affect the interpretation of the
keystrokes that are contained within the macro or the string.
This fixes https://savannah.gnu.org/bugs/?57660.
Bug existed since macros were introduced, in version 2.9.0.
A control code cannot be a Meta keystroke, and a plain printable
character as key code necessarily means it is a Meta keystroke.
So, comparing just the key code is enough.
Note that DEL_CODE (0x7F) will never occur as input key code, because
it gets translated to KEY_DC in the input routine (or to KEY_BACKSPACE
when --rebinddelete is in effect).
The Shift detection on a Linux console was meant to affect only the
dedicated cursor-movement keys, not <Shift+Meta+character>.
This fixes https://savannah.gnu.org/bugs/?57598.
Indirectly-reported-by: Brand Huntsman <alpha@qzx.com>
As long as the user does not define any Sh-M-X bindings in their nanorc,
<Shift> and <CapsLock> will not have any effect on <Alt+letter> combos.
But as soon as any Sh-M-X combination is bound, <Shift+Alt+letter> will
be seen as different from the unshifted keystroke.
This kind of fulfills https://savannah.gnu.org/bugs/?54659.
Requested-by: Peter Passchier <peter@passchier.net>
Since ^@ is rebindable too and also a synonym of ^Space, it makes
more sense to allow the user to specify ^` instead, as it is an
unshifted keystroke on US keyboards.
Also, color ^` as valid in a nanorc file, and color ^` and ^@ in
the help viewer.
The meta flag needs to be suppressed only for the self-defined
<Meta+arrow> key codes.
This fixes https://savannah.gnu.org/bugs/?57643.
Bug existed since commit 5130c35b from a few hours ago.
Some key strings map to the same key code, so to unbind also a string's
synonyms, go through the list comparing against the key code. It has
the additional advantage that it is faster: a plain value comparison
instead of a string comparison.
There is no need to compare also the meta flag, because plain printable
ASCII characters (from 0x20 to 0x7E) cannot be shortcuts, so when such
a character matches, it necessarily means it is a meta keystroke.
This fixes https://savannah.gnu.org/bugs/?57397.
When assign_keyinfo() gets passed zero as key code, it will call
keycode_from_string() to determine the key code from the string.
So, remember the key code when keycode_from_string() gets called
the first time to avoid the second call.
When the mark is set at the current cursor position, and then something
is pasted (either with ^U or from outside of nano), then this entire
pasted text should be marked -- just like when it had been typed. So,
the mark's position should not be adjusted not only when it is located
before the cursor but also when it is at the same place as the cursor.
This fixes https://savannah.gnu.org/bugs/?57631.
Bug existed since version 2.0.7.
Just like nano beeps when an unbound key is pressed at other prompts,
or in the help viewer, or in the file browser.
Signed-off-by: Brand Huntsman <alpha@qzx.com>
The suppression of auto-indentation, automatic hard-wrapping, and
tab-to-spaces conversion is now inherent in the way the reading-in
of a bracketed paste is handled by the previous commit: as a single
block of text.
This makes an external paste (with mouse or <Shift+Insert>) behave
the same as an internal paste (^U), and also inherently suppresses
auto-indentation, automatic hard-wrapping, and tab conversion.
This fulfills https://savannah.gnu.org/bugs/?54950.
This is a workaround for the VT not being able to handle zero-width
characters properly, displaying them mistakenly as visible characters.
This avoids https://savannah.gnu.org/bugs/?52954.
The problem has existed since forever, but has become noticeable
since the capability for line numbers was added in version 2.7.1.
(The ideal behavior would be that nano would warn the user beforehand,
before the file that is being edited by someone else gets overwritten,
but that would require many more changes. So... just give a helpful
warning -- that's already better than it was.)
(When the new or changed name is that of an existing file AND this
file is being edited by some other editor (or nano itself), then the
behavior is rather strange: nano asks whether to continue, but the
file has already been overwritten and there is nothing the user can
do to cancel or revert things. A later commit should improve this.)
This fixes https://savannah.gnu.org/bugs/?47975,
and fixes https://savannah.gnu.org/bugs/?53883.
Also, do not break overlong lines and do not convert tabs to spaces,
nor interpret a <Tab> as an indent command (when the mark is on).
In other words: accept an outside paste as literally as possible.
This fulfills https://savannah.gnu.org/bugs/?40060.
Requested-by: Egmont Koblinger <egmont@gmail.com>
And fulfills https://savannah.gnu.org/bugs/?57527.
Requested-by: Sébastien Desreux <seb@h-k.fr>
Requested-by: Hans Ecke <hecke@gxt.com>
Original-idea-by: Brand Huntsman <alpha@qzx.com>
Also, tell the terminal to switch on bracketed-paste mode, and toggle
a boolean when the start and stop sequences of such a paste are seen.
This boolean can later be used to suppress auto-indent and such.
Signed-off-by: Brand Huntsman <alpha@qzx.com>
The file may not be modified when in View mode, so it makes no sense
to prominently show the M-J keystroke in the Search menu when in that
mode, especially since the keystroke does not really belong there.
This addresses https://savannah.gnu.org/bugs/?57574.
The extract() and copy_from_buffer() functions are mainly used for
cutting a line or a region, so move them to src/cut.c. Also move
the function for which copy_from_buffer() is a wrapper.
When suspending nano on a Linux console (or FreeBSD console), the
helpful message about using the 'fg' command overwrote the start
of the second help line, kind of hiding the message. So, output
a double newline before the message to make it stand out.
Also, drop a pointless cursor movement, as endwin() determines
the placement of the cursor all by itself.
Since the previous commit, USE_SLANG can only be defined when NANO_TINY
is also defined. This means that code that is present only in non-tiny
versions does not need to cater for Slang.
With ncurses, a window resize will cause getch() to return immediately
with some dummy value, which nano can discard. But with Slang, getch()
will return only when the next keystroke is typed, so the received code
should then not be discarded.
This fixes https://savannah.gnu.org/bugs/?57507.
The F13 to F16 function keys are no longer bound by default, and when
there is no nanorc file, there is no way to bind them, so there is no
point in recognizing their escape sequences.
Also, avoid calling a case-changing function when it's not needed.
And elide a default case that can never occur (because the function
always gets called with one of the four letters).
Nano does not do anything for the keystroke anyway (KEY_B2, the center
key on the numeric keypad, gets translated to ERR later on), so there
is no point in recognizing some of its escape sequences -- let those
sequences result in "Unknown sequence" instead.
When --rawsequences is used, consume the full escape sequences for
the F17 to F24 function keys (on xterm-compatible terminals and on
the Linux console), to prevent them entering junk into the buffer.
This fixes https://savannah.gnu.org/bugs/?57483.
When a line in a help text is wider than the terminal, then do not break
that line at COLS - 1, but simply at COLS. In olden times it made some
sense to have an empty column on the right of the introductory text, to
mirror the one on the left. But since the width of the introductions
got limited to 74 columns (four years ago, in commit a9aa0ef9), those
texts have (on a default 80-column terminal) at least six empty columns
on their righthand side. And on narrower terminals, we really don't
want to waste anything and should use all available space.
Also, this whole mechanism of making an exception for end-of-string or
end-of-paragraph and letting only those make use of the final column,
it was a waste of time: it kind-of did the whole break_line() process
again, but then for the entire string (which can be some five hundred
characters long in the introductory texts). So... get rid of it, make
it simple. On an 80-column terminal it doesn't make any difference.
When break_line() is called with its last parameter set to TRUE
(meaning that it will break also at a newline) it will return a
value that is bigger than 1. So it is pointless to ensure that
it is at least 1.
When justifying a paragraph, always first squeeze() is called on
the text (which at that moment consists of a single long line),
which means that (in its wrappable part) this line contains only
single spaces as word separators (and maybe a double space after
a period). So there is no need to call the general is_blank()
function -- checking for a space is enough.
Rationale: nano should not wrap inside the quoting part of a line
because it would change the quoting level, which would misrepresent
things, nor should it wrap inside the indentation part because when
the user tries to indent something beyond the target wrapping width,
she/he does not intend to create a line containing only whitespace,
but effectively wants to push the text beyond the wrapping width.
This copies the behavior of the rewrap_paragraph() routine that is
used during justification, so that automatic hard-wrapping ends up
with the same result as justifying.
Also, always do automatic hard-wrapping when --breaklonglines is in
effect, also when --autoindent is active.
This fixes https://savannah.gnu.org/bugs/?57425.
The bug was old -- it existed since at least version 2.0.6.
This furthermore avoids https://savannah.gnu.org/bugs/?57422.
Reported-by: Sébastien Desreux <seb@h-k.fr>
That bug existed since version 4.4, commit 8fce33af.
That is: allow tabs and spaces to be mixed when comparing indentation.
When the mix of tabs and spaces pushes the text of a line to the same
column as on a consecutive line, then those two lines are considered
to have the same indentation and thus belong to the same paragraph.
This reverts the previous commit (594ef222), and improves upon how
nano has behaved since version 2.9.8.
This fixes https://savannah.gnu.org/bugs/?57404 differently.
That is: two consecutive lines are considered to belong to separate
paragraphs when the smallest indentation of those two lines is not
character-by-character identical with the corresponding piece of
indentation of the other line.
In other words: if one line is indented with spaces, and a consecutive
line is indented by the same distance but with tabs, they are taken to
belong to different paragraphs: a justification will not merge them.
This fixes https://savannah.gnu.org/bugs/?57404.
Bug existed since version 2.9.8, commit 432a7d77.
Go back to how line numbers were colored in versions 2.7.1 to 4.3 --
coloring the space (when a background color is used) was unintented.
This fixes https://savannah.gnu.org/bugs/?57412.
Bug existed since version 4.4, commit 699cacf7.
For symmetry with the help viewer.
Even though the user could still exit with the bare Q, E, or X keys,
these are not listed in the help text, so they don't really count.
As was noted two months ago: nowhere in the manual does it say that
keywords are case-insensitive, and the manual shows all keywords in
lowercase, and all the examples are in lowercase too. So... simply
expect keywords to be in all lowercase.
It allows entering a TAB character at the cursor position while the
mark is on the same line as the cursor, as some users sometimes do.
This refines the feature that was added in version 2.9.2, and makes
it behave like in the Gedit and Kate editors, for example.
This addresses https://savannah.gnu.org/bugs/?57357.
Reported-by: Sébastien Desreux <seb@h-k.fr>
When we switch to another buffer, the window may have been resized
since we were last in this buffer, so make sure that 'firstcolumn'
gets a fitting value.
This fixes https://savannah.gnu.org/bugs/?56991.
Bug existed since version 2.8.0, since the softwrap overhaul.
Also, 'hunspell' is sensitive to the 'LANG' environment variable,
so that spell checking will take place for the language that the
user is using, instead of always for English. (This is a behavior
change, and some people may not like it, expecting the spell check
to occur always for English, but... we'll see.)
This increases the chances that spell checking will work out of the box,
without any extra installing or configuration.
This addresses https://savannah.gnu.org/bugs/?57296.
There are several cases (searching, replacing, spell checking, ...)
where exiting from the help viewer does NOT return the user to the
editing of the buffer.
This fixes https://savannah.gnu.org/bugs/?57295.
Bug existed since version 4.3, commit 5817e83e.
Also for the "universal" functions (like cursor movement) and the
special 'implant' function, the 'all' keyword should include the
browser menu.
This fully fixes https://savannah.gnu.org/bugs/?57280.
Bug existed since version 3.2, commit cc01bc3e.
Also, when something goes wrong in the later stages of the pipeline,
the error code would try to close descriptors that are already closed,
which is not right. So, just let exit() handle any file descriptors
that are still open.
When something goes wrong, nano should beep and the status bar should
use the error color (red by default).
This fixes https://savannah.gnu.org/bugs/?57116.
Run the formatting program outside of curses mode, so that any output
(complaints) that it produces will be on the terminal after exiting
from nano -- at least on a terminal emulator, not on a Linux VT.
This also allows the formatter to be an interactive program.
The disadvantage is that the screen flickers when typing M-F.
This fixes https://savannah.gnu.org/bugs/?57104.
Benno Schulenberg