lbmk/include/mrc.sh

62 lines
2.1 KiB
Bash
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0-only
# Logic based on util/chromeos/crosfirmware.sh in coreboot cfc26ce278.
NEW MAINBOARD: HP EliteBook 820 G2 This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-07 13:25:33 +00:00
# Modifications in this version are Copyright 2021, 2023 and 2024 Leah Rowe.
# Original copyright detailed in repo: https://review.coreboot.org/coreboot/
eval "$(setvars "" MRC_url MRC_url_bkup MRC_hash MRC_board SHELLBALL)"
extract_mrc()
{
chkvars "MRC_board" "CONFIG_MRC_FILE"
SHELLBALL="chromeos-firmwareupdate-$MRC_board"
(
x_ cd "$appdir"
extract_partition "${MRC_url##*/}"
extract_archive "$SHELLBALL" .
safer, simpler error handling in lbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
) || $err "mrc download/extract failure"
"$cbfstool" "$appdir/"bios.bin extract -n mrc.bin \
-f "$_dest" -r RO_SECTION || $err "extract_mrc: !$cbfstool $_dest"
NEW MAINBOARD: HP EliteBook 820 G2 This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-07 13:25:33 +00:00
[ -n "$CONFIG_REFCODE_BLOB_FILE" ] && extract_refcode; return 0
}
extract_partition()
{
printf "Extracting ROOT-A partition\n"
ROOTP=$( printf "unit\nB\nprint\nquit\n" | \
parted "${1%.zip}" 2>/dev/null | grep "ROOT-A" )
START=$(( $( echo $ROOTP | cut -f2 -d\ | tr -d "B" ) ))
SIZE=$(( $( echo $ROOTP | cut -f4 -d\ | tr -d "B" ) ))
dd if="${1%.zip}" of="root-a.ext2" bs=1024 skip=$(( $START / 1024 )) \
count=$(( $SIZE / 1024 )) || $err "ex dd ${1%.zip}, root-a.ext2"
printf "cd /usr/sbin\ndump chromeos-firmwareupdate $SHELLBALL\nquit" \
safer, simpler error handling in lbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
| debugfs "root-a.ext2" || $err "can't extract shellball"
}
NEW MAINBOARD: HP EliteBook 820 G2 This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-07 13:25:33 +00:00
extract_refcode()
{
_refdest="${CONFIG_REFCODE_BLOB_FILE##*../}"
e "$_refdest" f && return 0
NEW MAINBOARD: HP EliteBook 820 G2 This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-07 13:25:33 +00:00
# cbfstool changed the attributes scheme for stage files,
# incompatible with older versions before coreboot 4.14,
# so we need coreboot 4.13 cbfstool for certain refcode files
chkvars cbfstoolref
mkdir -p "${_refdest%/*}" || $err "ref: !mkdir -p ${_refdest%/*}"
NEW MAINBOARD: HP EliteBook 820 G2 This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-07 13:25:33 +00:00
"$cbfstoolref" "$appdir/bios.bin" extract \
-m x86 -n fallback/refcode -f "$_refdest" -r RO_SECTION \
safer, simpler error handling in lbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
|| $err "extract_refcode $board: !cbfstoolref $_refdest"
NEW MAINBOARD: HP EliteBook 820 G2 This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-07 13:25:33 +00:00
# enable the Intel GbE device, if told by offset MRC_refcode_gbe
[ -z "$MRC_refcode_gbe" ] || dd if="config/ifd/hp820g2/1.bin" \
of="$_refdest" bs=1 seek=$MRC_refcode_gbe count=1 conv=notrunc || \
safer, simpler error handling in lbmk in shell scripts, a function named the same as a program included in the $PATH will override that program. for example, you could make a function called ls() and this would override the standand "ls". in lbmk, a part of it was first trying to run the "fail" command, deferring to "err", because some scripts call fail() which does some minor cleanup before calling err. in most cases, fail() is not defined, and it's possible that the user could have a program called "fail" in their $PATH, the behaviour of which we could not determine, and it could have disastrous effects. lbmk error handling has been re-engineered in such a way that the err function is defined in a variable, which defaults to err_ which calls err_, so defined under include/err.sh. in functions that require cleanup prior to error handling, a fail() function is still defined, and err is overridden, thus: err="fail" this change has made xx_() obsolete, so now only x_ is used. the x_ function is a wrapper that can be used to run a command and exit with non-zero status (from lbmk) if the command fails. the xx_ command did the same thing, but called fail() which would have called err(); now everything is $err example: rm -f "$filename" || err "could not delete file" this would now be: rm -f "$filename" || $err "could not delete file" overriding of err= must be done *after* including err.sh. for example: err="fail" . "include/err.sh" ^ this is wrong. instead, one must do: . "include/err.sh" err="fail" this is because err is set as a global variable under err.sh the new error handling is much cleaner, and safer. it also reduces the chance of mistakes such as: calling err when you meant to call fail. this is because the standard way is now to call $err, so you set err="fail" at the top of the script and all is well. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-03-27 01:19:39 +00:00
$err "extract_refcode $_refdest: byte $MRC_refcode_gbe"; return 0
NEW MAINBOARD: HP EliteBook 820 G2 This is of Broadwell platform, one generation above Haswell. Of note: this uses HP Sure Start. Although the flash is 16MB, our CBFS section (and IFD configuration) assumes 12MB flash, so the final 4MB will be left unflashed on installation, after blanking the private flash. The coreboot documents have more information about this. Some minor design changes in lbmk were made, to accomodate this port: Support for extracting refcode binaries added (pulled from Google recovery images). The refcode file is an ELF that initialises the MRC and the PCH. It is also responsible for enabling or disabling the Intel GbE device, where Google does not enable it, but lbmk modifies it per the instructions on the coreboot documentation, so as to enable Intel GbE. Google's recovery image stores the refcode as a stage file, but coreboot changed the format (for CBFS files) after 4.13 so coreboot 4.13's cbfstool is used to extract refcode. This realisation made me also change the script logic to use a cbfstool and ifdtool version matching the coreboot tree, for all parts of lbmk, whereas lbmk previously used only the default tree for cbfstool/ifdtool, on insertion and deletion of vendor files - it was 81dc20e744 that broke extraction of refcode on google's recovery images, where google used an older version of cbfstool to insert the files in their coreboot ROMs. A further backported patch has been added, copying coreboot revision f22f408956 which is a build fix from Nico Huber. Iru Cai submitted an ACPI bugfix after the revision lbmk currently uses, for coreboot/default, and this fix is needed for rebooting to work on Linux 6.1 or higher. This patch has been backported to lbmk, while it still uses the same October 2023 revision of coreboot. Broadwell MRC is inserted at the same offset as Haswell, so I didn't need to tweak that. Signed-off-by: Leah Rowe <leah@libreboot.org>
2024-01-07 13:25:33 +00:00
}