right now, if we want to patch a project such that certain
submodules are no tdownloaded, or diffreent submodules are
downloaded, or current ones are downloaded from other
locations, we cannot do this, because we apply submodule
updates *before* applying patches.
therefore, we should change it so that they are applied
*after* installing patches.
Signed-off-by: Leah Rowe <leah@libreboot.org>
the script can now also handle autoconf build systems,
whereas this could previously only be done for grub.
with this change, the overall sloccount is also lower
Signed-off-by: Leah Rowe <leah@libreboot.org>
while seemingly pedantic, this does actually make code
easier to read. mostly just switching to shorthand for
variable names, where no expansions or patterns are used
Signed-off-by: Leah Rowe <leah@libreboot.org>
lbmk used to set version/versiondate directly in
err.sh, but now it's handled there by a function,
which is called by the main script.
script/update/release hadn't yet been adapted. the
only change necessary is to call check_project()
script/update/trees also makes use of it
script/build/roms is using "projectname"
Signed-off-by: Leah Rowe <leah@libreboot.org>
the shellball (for extracting the coreboot rom, to get
at mrc.bin) contains lines that are not posix-friendly.
specifically, the "local" command is used, and this is
not defined for posix sh.
the shellball is essentially just a bunch of shell
functions that compress/decompress the zip file,
containing the firmware update. you can modify the
files and re-run the shellball to recompress, though
lbmk just uses the decompress function.
as pointed out by Nicholas Chin, it is possible to just
run "unzip" directly on the update, to get at bios.bin.
we don't really need all the extra checks performed by
the shellball, so let's just bypass it altogether.
Signed-off-by: Leah Rowe <leah@libreboot.org>
this part of the code *must* return. the for loop
afterwards must not be permitted to execute.
it's unlikely that this would ever occur, unless
perhaps the user is using a very buggy sh.
Signed-off-by: Leah Rowe <leah@libreboot.org>
lbmk didn't quote certain arguments in commands, or
used ! -z instead of -n, things like that. simple fixes.
Signed-off-by: Leah Rowe <leah@libreboot.org>
most of these are probably redundant, and will never
be called, but lbmk needs to be as safe as possible
under fault conditions. fail early, fail hard.
Signed-off-by: Leah Rowe <leah@libreboot.org>
update/trees wasn't correctly returning non-zero status,
even though it was printing an error message, when git-am
failed. this is due to the way subshells work, and it was
overlooked in previous auditing.
additionally: don't directly copy trees to the destination,
instead patch/reset first, then copy only under normal
condition, just as with single-tree projects.
when running build/roms, the script would continue after
a bad git-am, without exit. this patch fixes it in the
most paranoid way possible. i'm now fairly confident that
lbmk will fail gracefully and efficiently, under error
conditions. this should prevent bad image builds.
Signed-off-by: Leah Rowe <leah@libreboot.org>
don't run it directly at the bottom of err.sh,
because otherwise the version and versiondate
files will be generated when running "./build
dependencies distroname" which would then create
these files, but as root because the user runs
that specific command as root.
the rest of lbmk, for any other command, prevents
use of the root account, so running check_project
during "./build dependencies distroname" will cause
the build system to fail (because as non-root user,
the user will run lbmk and it will try to update
those files, and fail because it can't, due to lack
of permissions)
this patch fixes the issue, by only generating those
files if the user is *not* root
Signed-off-by: Leah Rowe <leah@libreboot.org>
it wasn't being copied right
the roms under elf/ were being copied, but not the ones
under bin/ - i need to audit it further
for now, i run modify_coreboot_roms from build/roms
instead of update/trees
so, the ones under elf/ no longer have bootblocks copied.
it's only done in bin/
Signed-off-by: Leah Rowe <leah@libreboot.org>
keymaps weren't being set in keymay.cfg of cbfs, due
to use of x_ in the rom script, and x_ doesn't handle
quotes or spaces in arguments well.
i'm going to remove use of x_ and xx_ (it's in my todo),
for next release.
for now, hot patch the release. i've gone through and
replaced use of x_ with || err, in some places.
not just the keymap.cfg command, but others too. in case
there are more issues we missed.
this commit is being tagged "20231021fix" and i'm using
this tag to re-build the 20231021 release. i'll just
replace the tarballs in rsync and add errata to the news
page announcing the release. all i did was break peoples
umlauts, i didn't brick their machines fortunately!
very minor bug. anyway, x_/xx_ is a great idea, but sh
isn't really designed for that style of programming. i'll
go back to using just || err in the next release.
Signed-off-by: Leah Rowe <leah@libreboot.org>
in release archives, .git is excluded but the version
and versiondate files are included. from these, the
git history is re-created with the exact date (but not
taking into account timezone, at present).
in this way, lbmk will have git history in a release
archive. some build systems, like coreboot, prefer that
there be git history available, so this is a nice
workaround on those build systems.
Signed-off-by: Leah Rowe <leah@libreboot.org>
when [] is used right at the end of a function, or
certain loops/subshells, some sh implementations will
just return a non-zero exit
Signed-off-by: Leah Rowe <leah@libreboot.org>
only fetch if .gitmodules exists
in some cases, lbmk is compiling source trees that
use submodules, without having downloaded them first.
in all cases, those submodules are either optional,
or the build system auto-fetches them (or if it can,
we sometimes disable it as with grub and gnulib).
this is a nice fallback behaviour, for situations where
we forget to put submodules as dependencies under
config/git (and disable submodules in the given project).
with this change, release archives are guaranteed to
be complete, sans crossgcc downloads in coreboot; this
will be handled in a follow-up commit.
Signed-off-by: Leah Rowe <leah@libreboot.org>
in some cases, use of x_ or xx_ can be error-prone,
due to the way $@ is handled; commands requiring
quotes, or with funny file names as arguments such
as spaces in the file name, or other special
characters, can make the x/xx functions break.
in those cases, where x/xx must not be used, the
commands use || err instead
in other cases, use of x/xx is superfluous, and has
been removed in some commands.
Signed-off-by: Leah Rowe <leah@libreboot.org>
as opposed to the current 3-level structure.
recent build system simplifications have enabled
this change, thus:
./build fw coreboot -> ./build roms
./build fw grub -> ./build grub
./build fw serprog -> ./build serprog
./update project release -> ./update release
./update project trees -> ./update trees
./update vendor download -> ./vendor download
./update vendor inject -> ./vendor inject
alper criticised that the commands were too long,
so i made them shorter!
Signed-off-by: Leah Rowe <leah@libreboot.org>
move it all to other files where items are used, and not
used anywhere else. this reduces the size of vendor.sh.
also remove a few redundant variables, or variables that
are not meaningfully used.
a few items have been moved to include/option.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
they are the functions only used by the download
script, so they don't belong in vendor.sh
an include file should only contain variables and
functions used by multiple main scripts
Signed-off-by: Leah Rowe <leah@libreboot.org>
This way, the handling of configs is unified into one
script, which reduces the possibility of bugs later,
and it reduces the repetition of code.
Signed-off-by: Leah Rowe <leah@libreboot.org>
coreboot closely matches upstream, whose current release
is version 1.2 from 2018, and coreboot has not changed it
in any meaningful way.
the upstream did add patches since, but they are documentation
patches only.
this means: we do not need to use the upstream version
Signed-off-by: Leah Rowe <leah@libreboot.org>
it's already executed in "build"
running it in err.sh makes the user have to set
git name/email as root, when running dependencies
scripts. this is a regression, that this patch
fixes. git isn't needed to install dependencies.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Just one script.
Just one!
Well, two, but the 2nd one already existed:
logic in update/project/trees and
update/project/repo was merged into
include/git.sh and update/project/build
was renamed to update/project/trees; an -f
option was added, which calls the functions
under git.sh
so git clones are now handled by the main build
script (for handling makefiles and defconfigs)
but the logic there is a stub, where git.sh
does all the actual heavy lifting
this cuts the file count down by two, and reduces
sloccount a reasonable amount because much of
the logic already exists in the build script, when
it comes to handling targets. git.sh was adjusted
to integrate with this, rather than act standalone
Signed-off-by: Leah Rowe <leah@libreboot.org>
in the future, we may start downloading files that aren't
blobs, such as mxm port configs (on mainboards that use
MXM graphics)
this directory will contain all of those files
generally change the language used, across lbmk, to make
use of "vendorfile" instead of "blob"
Signed-off-by: Leah Rowe <leah@libreboot.org>
We don't have a directory names "srces", just "src".
Ditto ecs, mrcs <-- it's just ec and mrc
When referring to a file, e.g. blob/t1650/me.bin, that
makes much more sense, because it's a single blob, not
multiple blobs.
Don't pluralise what isn't plural
Signed-off-by: Leah Rowe <leah@libreboot.org>
build/release/src was partly re-written to accomodate this
memtest86plus was patched to have a central Makefile, and
lbmk modified to use that, rather than mess with build32
and build64. the central Makefile just builds both targets
or cleans both targets
Signed-off-by: Leah Rowe <leah@libreboot.org>
for the first time ever, this is a single script.
with recent simplifications in how variables are
handled, and techniques i've developed during
auditing, it's now feasible design-wise for this
to be a single script, without a helper script.
Signed-off-by: Leah Rowe <leah@libreboot.org>
slight sloccount reduction. light renaming of
functions between the two scripts, placing more
logic in main() under include/boot.sh
Signed-off-by: Leah Rowe <leah@libreboot.org>
errors are not defined for mktemp, and the /tmp file
system should be assumed reliable.
if /tmp is *unreliable*, then this is not something that
lbmk either can or should fix; the user clearly has
bigger problems.
manpages for mktemp do not define errors. it is assumed
to be completely reliable.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Instead of having detailed error messages, run most
commands through a function that calls err() under
fault conditions.
Where detail is still required, err() is still called
manually. Where it isn't, the error message is simply
whatever command was executed to cause the error.
This results in a massive sloccount reduction for lbmk;
specifically, 178 sloc reduction, or a 8.1% reduction.
The total sloccount is now 2022, for shell scripts.
Signed-off-by: Leah Rowe <leah@libreboot.org>
also: further reduce the number of arguments passed,
to certain functions as and when feasible, in cases
where those are global variables that never change.
the cbfstool argument in mkUbootRom wasn't even used.
that function was only using the global variable, which
again is only set once.
i also shortened a few messages, removed a few errant
line breaks and reduced sloccount by exactly 1 in main()
by re-arranging how the shift command is used.
it's mainly about shortening variable names, to then
reduce the number of line breaks, but it's a surgical
code size reduction in build/boot/roms.
Signed-off-by: Leah Rowe <leah@libreboot.org>
-k, -p and -d let you set keymap, payload and displaymode
respectively, but the handling for this is buggy when
passing multiple arguments.
Support only one argument, for simplicity. This is how
people use them anyway, and it makes lbmk less buggy.
Signed-off-by: Leah Rowe <leah@libreboot.org>
The *same* main() function is now used on both scripts.
However, merging both scripts together would be less efficient
on sloccount, and would be error-prone. The purpose of having
roms_helper is that the variables get re-initialised the same
way each time, for each board, automatically.
Signed-off-by: Leah Rowe <leah@libreboot.org>
update/blobs/download and update/project/repo both use
the same logic, for setting variables with awk and a
specially formatted configuration file.
unify this logic under include/option.sh, and use that.
Signed-off-by: Leah Rowe <leah@libreboot.org>
mkdirs() should be in include/blobutil.sh, as should
extract_archive(), because that is primarily where
they are used.
script/update/blobs/download calls these functions
aswell, but it sources include/blobutil.sh so it's OK.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Don't use only wget. Some systems may only have curl.
The user can always install wget anyway, but why not
support both? I've added the right user agent string.
Signed-off-by: Leah Rowe <leah@libreboot.org>
They are only ever used by script/update/blobs/*, so
put them all in blobutil.sh. This cuts down on the
number of scripts in lbmk.
Signed-off-by: Leah Rowe <leah@libreboot.org>
mrc.bin is now handled by include/mrc.sh, adapted
from now-deleted script/update/blobs/mrc
much of the logic has been re-written or adapted for
inside script/update/blobs/download
mrc links/hashes now defined in config/blobs/sources
the new code is simpler (and smaller). in addition,
lbmk can now easily handle mrc.bin files for other
platforms such as broadwell. watch this space.
the full .zip download is now cached, like with other
vendor downloads. this means it won't be re-downloaded
if it was already downloaded before.
Signed-off-by: Leah Rowe <leah@libreboot.org>
I was setting certain global variables inside for loops,
but some sh implementations won't like this.
Instead, don't run eval inside the for loops. Set a string
for eval inside the for loops, then execute eval outside of
the loops. This should work on every shell.
Signed-off-by: Leah Rowe <leah@libreboot.org>
do not update them in project/repos - despite what
the previous commit message says, this behaviour is
error prone and should be avoided.
Signed-off-by: Leah Rowe <leah@libreboot.org>
With this change, lbmk now also updates submodules on
simple git clones, not just multi-tree clones.
This is OK, because git does not return non-zero status
when git submodule update is ran, where git submodules
are not actually defined.
Signed-off-by: Leah Rowe <leah@libreboot.org>
This is done recursively, with the following rule:
files first, then directories.
Where all patch files are applied from within the
patch directory, subdirectories (within the patch
directory) are then tried in alphanumerical order.
Then, within each subdirectory tried, the same rule
is once again applied. This is done recursively,
until every patch file is applied.
The code no longer applies *.patch, but instead any
file. Additionally, symlinks are avoided.
Signed-off-by: Leah Rowe <leah@libreboot.org>
This results in much cleaner copyright and license declarations.
SPDX headers are legally recognised and make auditing easier.
Also, remove descriptions of each script, from each script.
Libreboot documentation at docs/maintain/ describes them.
Signed-off-by: Leah Rowe <leah@libreboot.org>
Leah Rowe