don't constantly open/close the file: /dev/urandom
only read 12 bytes at a time
because of this change, the readFromFile() function now only
handles gbe files
The USB 2.0 ports on Exynos boards need the relevant driver enabled by
USB_EHCI_EXYNOS. This is enabled by default depending on USB_EHCI_HCD.
It's already enabled on snow and spring, but apparently not on peach
boards, as discovered from other people's attempts to enable it [1][2].
Enable it also on the peach_pi and peach_pit.
[1] 8f12e43dbf
[2] 11cacf55ad
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The display driver on the veyron boards needs reset drivers, more
specifically RESET_ROCKCHIP. This is enabled by default depending on
DM_RESET, which an upstream commit enables for veyron_jerry claiming it
fixes the display [1]. Enable it also in our configs, but for other
veyrons as well.
[1] https://lore.kernel.org/u-boot/20220928024046.2657593-1-sjg@chromium.org/
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
By making lbmk fully POSIX-compliant, it will be easier to port lbmk to
other systems implementing POSIX such as Alpine Linux and FreeBSD.
Signed-off-by: Ferass 'Vitali64' EL HAFIDI <vitali64pmemail@protonmail.com>
don't do xor swap. we know gbe2 is always 4KB higher than
gbe in memory, so we can just set gbe2 to the value of gbe,
and OR the size in bytes of 4KB into gbe2
this is only a marginal speed boost, negligible even, but it's
done for the lulz
similar to the last change by concept. we now write
individual 4KB blocks per part 0 and 1, at the end
of nvmutil, based on pointer values gbe and gbe2
instead of running memcpy, simply overwrite the pointer
this results in less I/O, thus more speed
instead of XOR-swapping every byte, have pointers to the
two parts and *XOR swap the pointers*. at the end of the
program execution, when writing, pwrite the two parts into
the same file
The configs were enabling SeaBIOS payload, but this is to be
handled by lbmk, not coreboot.
Further, they were enabling VGA ROM execution in coreboot, but
this should be handled by SeaBIOS.
This board should not have a GRUB payload enabled either; this
will be checked and fixed if necessary in the next commit.
Add U-Boot to the source release script's modules list so that it is
included in source release tarballs. Don't include the unused upstream
source and .git directories.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Copy the resources/scripts/build/clean/crossgcc script and adapt it to
run "make distclean" on U-Boot build trees. Some build artifacts persist
after the run, so also run "git clean -fdx" if we can.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
U-Boot build dependencies are listed on their online documentation [1],
but the listed Debian packages also include test-only dependencies.
While installing dependencies, install the packages necessary to build
U-Boot, except for the test-only ones I could identify.
[1] https://u-boot.readthedocs.io/en/latest/build/gcc.html
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add a build for QEMU AArch64 virtual machine using U-Boot as payload.
Coreboot config is based on the following defconfig:
CONFIG_CBFS_SIZE=0x00c00000
CONFIG_BOARD_EMULATION_QEMU_AARCH64=y
CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000
CONFIG_COREBOOT_ROMSIZE_KB_12288=y
CONFIG_UART_PCI_ADDR=0x0
The resulting ROM can be booted with a command line like:
qemu-system-aarch64 \
-machine virt,secure=on,virtualization=on \
-cpu cortex-a53 -m 1G \
-vga none -display none -serial stdio \
-bios bin/qemu_arm64_12mb/uboot_*.rom
However, this is little more than a proof of concept because U-Boot
upstream is missing coreboot integration on non-x86 boards, which could
have been useful for e.g. a framebuffer.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add a U-Boot payload build for the QEMU AArch64 virtual machine. The
config is same as upstream "qemu-arm64" defconfig, but SYS_TEXT_BASE is
set to 0x50000000 so that it doesn't conflict with coreboot. QEMU
auto-generates and passes a device-tree file to U-Boot at runtime,
there's no compile-time canonical version, so there's no need to set
REMAKE_ELF or OF_EMBED.
It's not immediately obvious if QEMU-specific drivers are available to
support display output, but most coreboot integration is unavailable
(depends on x86) and entire video subsystem is disabled in the U-Boot
upstream defconfig.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add a U-Boot build for the qemu_x86_12mb board. The config is a copy of
the upstream "coreboot" defconfig, but with OF_EMBED=y.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
U-Boot runtime configuration is done with a device-tree file, which is
built alongside the executable in the upstream build system, and must be
available to U-Boot at runtime.
This device-tree is normally not linked into the default "u-boot" ELF
file. So far we have been handling it by re-creating a "u-boot.elf" from
the raw binary parts by setting REMAKE_ELF, and using that as the
coreboot payload. Unfortunately, that fails to build for x86 boards,
more specificly the "coreboot" boards upstream.
It's also possible (but discouraged) to set OF_EMBED to embed the
device-tree file into the U-Boot itself, in which case we could use the
"u-boot" file as the payload on the "coreboot" boards. Add support for
using the "u-boot" file as the payload if "u-boot.elf" doesn't exist.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add a series posted to upstream mailing lists that makes the GRUB
text-mode console faster by implementing video damage tracking [1].
Refresh the config files to include its new VIDEO_DAMAGE Kconfig.
Patch 7/7 upstream has a tiny conflict with "Improve UEFI experience"
series we already have, but it's only in the diff context. No changes
other than fixing that.
[1] https://lore.kernel.org/u-boot/20220609225921.62462-1-agraf@csgraf.de/
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Set revision to the commit hash of the v2022.10 release, and run "make
olddefconfig" for all boards to refresh the configs.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Merge all boards into a common "default" tree, currently for v2022.07.
This ends up applying the "Improve UEFI experience on DM_VIDEO" series
to everything, so refresh the configs for the new options.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
The roms_helper script skips building crossgcc-i386 if its target
directory exists. Skip it for other architectures as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Add the coreboot-built cross-architecture toolchains to the PATH so that
modules and payloads can use them. When building for a foreign-arch
board, also export CROSS_COMPILE pointing to the appropriate prefix.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
This re-applies commit a69855f7e4 ("Build 32-bit crossgcc for AArch64
as well") which was inexplicably reverted along with unrelated changes.
Mention in a comment that building crossgcc-arm is necessary for
AArch64.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
When overriding which payloads will be built with the -p command line
argument, the roms_helper script builds the Memtest86+ payload before
checking if it should be disabled. Move the build command after the
command line override.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Leah Rowe